2025 Latest QREP Exam Dumps Recently Updated 62 Questions
Qlik QREP Real 2025 Braindumps Mock Exam Dumps
NEW QUESTION # 37
Which is the default port of Qlik Replicate Server on Linux?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
The default port for Qlik Replicate Server on Linux is3552. This port is used for outbound and inbound communication unless it is overridden during the installation or configuration process. Here's a reference to the documentation that confirms this information:
The official Qlik Replicate documentation states that "Port 3552 (the default rest port) needs to be opened for outbound and inbound communication, unless you override it as described below." This indicates that 3552 is the default port that needs to be considered during the installation and setup of Qlik Replicate on a Linux system1.
The other options provided do not correspond to the default port for Qlik Replicate Server on Linux:
A: 3550: This is not listed as the default port in the documentation.
B: 443: This is commonly the default port for HTTPS traffic, but not for Qlik Replicate Server.
C: 80: This is commonly the default port for HTTP traffic, but not for Qlik Replicate Server.
Therefore, the verified answer isD. 3552, as it is the port designated for Qlik Replicate Server on Linux according to the official documentation1.
NEW QUESTION # 38
A Qlik Replicate administrator is working on a database where thecolumn names in a source endpoint are too long and exceed the character limit for column names in the target endpoint.
How should the administrator solve this issue?
- A. Define a new Global Transformation rule of the Column type, and follow the prompts to filter and rename all columns in all tables
- B. Open the Windows command line terminal and run the renamecolumn command to update all affected columns of all tables
- C. Visit the Table Settings for each table and select the Filter tab to update all affected columns using a record selection condition
- D. Visit the Table Settings for each table in a task and select the Transform tab to update all affected columns within the Output pane
Answer: A
Explanation:
To address the issue of column names in a source endpoint being too long for the target endpoint's character limit, the Qlik Replicate administrator should:
D: Define a new Global Transformation rule of the Column type: This allows the administrator to create a rule that applies to all affected columns across all tables.By defining a global transformation rule, the administrator can systematically rename all columns that exceed the character limit1.
The process involves:
Going to the Global Transformations section in Qlik Replicate.
Selecting the option to create a new transformation rule of the Column type.
Using the transformation rule to specify the criteria for renaming the columns (e.g., replacing a prefix or suffix or using a pattern).
Applying the rule to ensure that all affected columns are renamed according to the defined criteria.
The other options are not as efficient or appropriate for solving the issue:
A: Open the Windows command line terminal and run the renamecolumn command: This is not a standard method for renaming columns in Qlik Replicate and could lead to errors if not executed correctly.
B: Visit the Table Settings for each table in a task and select the Transform tab: While this could work, it is not as efficient as defining a global transformation rule, especially if there are many tables and columns to update.
C: Visit the Table Settings for each table and select the Filter tab: The Filter tab is used for record selection conditions and not for renaming columns.
For more detailed instructions on how to define and apply global transformation rules in Qlik Replicate, you can refer to the official Qlik documentation onGlobal Transformations.
NEW QUESTION # 39
Two companies are merging Both companies have IBM DB2 LUW running The Qhk Replicate administrator must merge a database (12 TB of data) into an existing database (15 TB of data). The merge will be done by IBM load.
Which approach should the administrator use?
- A. Stop task, wait until IBM load finishes, and then resume the task
- B. Stop task, finish IBM load, reload target
- C. Continue to run the task
- D. Create a new task after finishing IBM load
Answer: A
Explanation:
When merging databases, especially of such large sizes (12 TB and 15 TB), it is crucial to ensure data integrity and consistency. The recommended approach is to:
Stop the Replication Task: This is important to prevent any changes from being replicated to the target while the IBM load process is ongoing.
Perform the IBM Load: Execute the IBM load to merge the database into the existing database.
Resume the Replication Task: Once the IBM load has been successfully completed, the replication task can be resumed.
This approach ensures that the data loaded via IBM load is not missed or duplicated in the target database. It also allows Qlik Replicate to continue capturing changes from the point where the task was stopped, thus maintaining the continuity of the replication process.
It's important to note that creating a new task after the IBM load (Option D) could lead to complexities in managing the data consistency and might require additional configuration. Continuing to run the task (Option C) could result in conflicts or data integrity issues during the load process. Therefore, Option B is the safest and most reliable approach to ensure a smooth merge of the databases.
For further details and best practices, you can refer to the official Qlik Replicate documentation and support articles which provide guidance on similar scenarios1234.
NEW QUESTION # 40
When working with Qlik Enterprise Manager, which component must be installed to run Analytics under Enterprise Manager?
- A. Qlik Replicate
- B. PostgreSQL Database
- C. Qlik Compose and Replicate
- D. Qlik Compose
Answer: B
Explanation:
To run Analytics under Qlik Enterprise Manager, it is required to have aPostgreSQL Databaseinstalled.
This is because the Analytics data for Qlik Enterprise Manager is stored in a PostgreSQL database.Before using the Analytics feature, you must ensure that PostgreSQL (version 12.16 or later) is installed either on the Enterprise Manager machine or on a machine that is accessible from Enterprise Manager1.
Here are the steps and prerequisites for setting up Analytics in Qlik Enterprise Manager:
Install PostgreSQL: The setup file for PostgreSQL is included with Enterprise Manager, and it must be installed to store the Analytics data1.
Create a dedicated database and user: A dedicated database and user in PostgreSQL should be created, which will own the tables accessed by the Enterprise Manager Analytics module1.
Configure connectivity: Connectivity to the PostgreSQL repository must be configured as described in the Repository connection settings1.
Data collection and purging: Configure data collection and purging settings as described in the Analytics - Data collection and purge settings1.
Register a license: A Replication Analytics license is required to use Analytics.If you have a license, you can register it by following the procedure described in Registering a license1.
The other options provided, such as Qlik Replicate (A), Qlik Compose (B), and both Qlik Compose and Replicate (D), are not components that must be installed to run Analytics under Enterprise Manager.The essential component is the PostgreSQL Database , which serves as the backend for storing the Analytics data1.
Therefore, the verified answer isC. PostgreSQL Database, as it is the required component to run Analytics under Qlik Enterprise Manager1.
NEW QUESTION # 41
Which is the minimum role permission that should be selected for a user that needs to share status on Tasks and Server activity?
- A. Operator
- B. Admin
- C. Viewer
- D. Designer
Answer: C
Explanation:
To determine the minimum role permission required for a user to share status on Tasks and Server activity in Qlik Replicate, we can refer to the official Qlik Replicate documentation. According to the documentation, there are four predefined roles available: Admin, Designer, Operator, and Viewer. Each role has its own set of permissions.
The Viewer role is the most basic role and provides the user with the ability to view task history, which includes the status on Tasks and Server activity.This role does not allow the user to perform any changes but does allow them to share information regarding the status of tasks and server activity1.
Here is a breakdown of the permissions for the Viewer role:
View task history: Yes
Download a memory report: No
Download a Diagnostics Package: No
View and download log files: No
Perform runtime operations (such as start, stop, or reload targets): No Create and design tasks: No Edit task description in Monitor View: No Delete tasks: No Export tasks: No Import tasks: No Change logging level: No Delete logs: No Manage endpoint connections (add, edit, duplicate, and delete): No Open the Manage Endpoint Connections window and view the following endpoint settings: Name, type, description, and role: Yes Click the Test Connection button in the Manage Endpoint Connections window: No View all of the endpoint settings in the Manage Endpoint Connections window: No Edit the following server settings: Notifications, scheduled jobs, and executed jobs: No Edit the following server settings: Mail server settings, default notification recipients, license registration, global error handling, log management, file transfer service, user permissions, and resource control: No Specify credentials for running operating system level post-commands on Replicate Server: No Given this information, the Viewer role is sufficient for a user who needs to share status on Tasks and Server activity, making it the minimum role permission required for this purpose1.
NEW QUESTION # 42
The designer creates a replication task with the source schema name 'HR' and renames the schema in the following areas:
1. In Global Transformation, create a rule to rename schema to 'USER1'
2. In Task Settings -> Target Metadata, enter the Target table schema as 'USER2'
3. In Global Transformation, add a new column named 'SCHEMA' and expression as 'USER3' Which is the final target schema name?
- A. USER3
- B. USER1
- C. USER2
- D. HR
Answer: C
Explanation:
In Qlik Replicate, when multiple schema rename rules are applied, the final schema name isdetermined by the last applied setting that affects the schema name directly. Here's how the process works:
Global Transformationto rename schema to 'USER1': This rule will initially rename the schema from
'HR' to 'USER1'.However, this is not the final schema name as further changes are applied later in the task settings1.
Task Settings -> Target Metadatato enter the Target table schema as 'USER2': This setting overrides the previous global transformation rule and sets the target schema name to 'USER2'.This is because the Target Metadata settings are applied after the Global Transformations and directly affect the target schema name1.
Global Transformationto add a new column named 'SCHEMA' with expression as 'USER3': While this rule adds a new column with a value of 'USER3', it does not change the schema name itself.It only affects the content of a column within the tables1.
Therefore, the final target schema name, after considering all the applied settings, isD. USER2.This is because the Target Metadata setting in the task settings has the final say on the target schema name, and it is set to 'USER2'1.
NEW QUESTION # 43
How can the task diagnostic package be downloaded?
- A. Right-click task from overview -> Download diagnostic package
- B. Download diagnostic package Go to server settings -> Logging -> Right-click task -> Support -> Download diagnostic package
- C. Open task from overview -> Run -> Tools -?
- D. Open task from overview -> Monitor -> Tools -> Support -> Download diagnostic package
Answer: D
Explanation:
To download the task diagnostic package in Qlik Replicate, you need to follow these steps:
Open the task from the overview in the Qlik Replicate Console.
Switch to theMonitorview.
Click on theToolstoolbar button.
Navigate toSupport.
SelectDownload Diagnostic Package1.
This process will generate a task-specific diagnostics package that contains the task log files and various debugging data that may assist in troubleshooting task-related issues. Depending on your browser settings, the file will either be automatically downloaded to your designated download folder, or you will be prompted to download it.The file will be named in the format<task_name>__diagnostics__<timestamp>.zip12.
The other options provided do not accurately describe the process for downloading a diagnostic package in Qlik Replicate:
Bis incomplete and does not provide a valid path.
Cincorrectly suggests going to server settings and logging, which is not the correct procedure.
Dsuggests a method that is not documented in the official Qlik Replicate help resources.
Therefore, the verified answer isA, as it correctly outlines the steps to download a diagnostic package in Qlik Replicate12.
NEW QUESTION # 44
Theconnection to the source endpoint is unavailable over several days. The log files contain only 2 hours of data before being deleted. Which Is the safest way to create a consistent state in the target endpoint?
- A. Recover from a locally stored checkpoint
- B. Use Reload Target Run option
- C. Resume task and ignore warnings
- D. Start processing changes from a fixed date and time
Answer: B
Explanation:
When the connection to the source endpoint is unavailable for an extended period, and the log files are limited to only 2 hours of data before being deleted, the safest way to ensure a consistent state in the target endpoint is to use theReload Target Run option (A). This approach is recommended because it allows for a complete refresh of the target data, ensuring that it is in sync with the source once the connection is re-established.
TheReload Target Run optionis designed to handle situations where the replication logs are not sufficient to recover the replicated state due to extended outages or log retention policies. Byreloading the target, you can be confident that the data reflects the current state of the source, without relying on potentially incomplete change logs.
Starting processing from a fixed date and time (B) or recovering from a locally stored checkpoint would not be reliable if the logs do not cover the entire period of the outage. Resuming the task and ignoring warnings (D) could lead to inconsistencies due to missed changes.
Therefore, theReload Target Run optionis the safest method to create a consistent state in the target endpoint under these circumstances1.
NEW QUESTION # 45
The Qlik Replicate developer notices that errors occur about the duplicate key when applying INSERT.
Which should be done in order to identify this Issue?
- A. Stop and resume the task
- B. Stop task and enable the Apply Exceptions control table
- C. Check the error message in the Apply Exceptions control table
- D. Stop and reload the task
Answer: C
Explanation:
When a Qlik Replicate developer encounters errors about a duplicate key when applying INSERT, the first step to identify and resolve the issue is to:
A: Check the error message in the Apply Exceptions control table: This control table contains detailed information about any exceptions that occur during the apply process, including duplicate key errors.By examining the error messages, the developer can understand the cause of the issue and take appropriate action to resolve it1.
The process involves:
Accessing the Qlik Replicate Console.
Navigating to the task that is experiencing the issue.
Opening the Apply Exceptions control table to review the error messages related to the duplicate key issue.
Analyzing the error details to determine the cause, such as whether it's due to a source data problem or a target schema constraint.
The other options are not the correct initial steps for identifying the issue:
B: Stop and reload the task: This action might temporarily bypass the error but does not address the root cause of the duplicate key issue.
C: Stop task and enable the Apply Exceptions control table: The Apply Exceptions control table should already be enabled and checked for errors as the first step.
D: Stop and resume the task: Resuming the task without identifying the cause of the error will likely result in the error reoccurring.
For more information on how to troubleshoot and handle duplicate key errors in Qlik Replicate, you can refer to the official Qlik community articles and support resources that provide guidance on error handling and the use of the Apply Exceptions control table2.
NEW QUESTION # 46
Which two endpomts have ARC (Attunity Replicate Connect) CDC (Change Data Capture) agents? (Select two )
- A. Kafka Source
- B. IBM IMS
- C. HP NonStop
- D. IBMDB2Z/OS
- E. SAPHANA
Answer: B,C
Explanation:
Questions no:17Verified answer: = A. IBM IMS & E. HP NonStopStep by Step Comprehensive and Detailed Explanation with all References: =ARC (Attunity Replicate Connect) CDC agents are used for capturing changes (CDC) and can be utilized with both relational and non-relational endpoints supported by ARC. The endpoints that have ARC CDC agents include:
IBM IMS (A): This is a database and transaction management system, and it is listed as one of the endpoints supported by ARC CDC agents1.
HP NonStop (E): This is a platform for high-availability servers and is also supported by ARC CDC agents1.
The other options provided do not align with the endpoints that have ARC CDC agents:
B: IBMDB2Z/OS: While DB2 for z/OS is a common database system, it is not mentioned in the context of ARC CDC agents.
C: Kafka Source: Kafka is a streaming platform, and while it can be an endpoint for data, it is not listed as having ARC CDC agents.
D: SAPHANA: SAP HANA is an in-memory database, and it is not specified as having ARC CDC agents.
Therefore, the verified answers areA. IBM IMSandE. HP NonStop, as they are the endpoints that utilize ARC CDC agents for capturing changes1.
NEW QUESTION # 47
By default, how long is the Apply Exceptions data retained?
- A. 60 days
- B. 7 days
- C. Indefinitely
- D. 30 days
Answer: C
NEW QUESTION # 48
Which types of notifications can be set up in Qlik Replicate?
- A. Server Events and Endpoint Events
- B. Task Events and Endpoint Events
- C. Server Events. Endpoint Events, and Task Events
- D. Task Events and Server Events
Answer: C
Explanation:
In Qlik Replicate, notifications can be set up for various events related to tasks, endpoints, and the server itself. The types of notifications that can be configured include:
Task Events: Notifications for task-based events, such as when a task starts or stops, when latency is too high, or when specific errors occur1.
Endpoint Events: While the search results did not explicitly mention "Endpoint Events," it is common in replication tools to have notifications related to endpoints, such as connectivity issues or endpoint-specific errors.
Server Events: Notifications related to the server, which could include system state changes, performance issues, or server-level errors2.
Therefore, the correct answer isC. Server Events, Endpoint Events, and Task Events, as Qlik Replicate allows setting up notifications for all these types of events. This ensures that administrators are alerted to a wide range of potential issues, allowing for prompt response and resolution.
For detailed instructions on how to set up each type of notification in Qlik Replicate, you can refer to the official Qlik documentation, which provides step-by-step guidance on defining and managing notifications for task events, server events, and other significant occurrences within the replication environment132.
NEW QUESTION # 49
Where are the three options in Qlik Replicate used to read the log files located? (Select three.)
- A. In External monitoring tool
- B. In Data directory of Installation
- C. In Enterprise Manager
- D. In Monitor of Qlik Replicate
- E. In Windows Event log
- F. In Diagnostic package
Answer: B,D,F
Explanation:
In Qlik Replicate, the options to read the log files are located in the following places:
In Diagnostic package (B): The diagnostic package in Qlik Replicate includes various log files that can be used for troubleshooting and analysis purposes1.
In Data directory of Installation (D): The log files are written to the log directory within the data directory.This is the primary location where Qlik Replicate writes its log files, and it is not possible to change this location2.
In Monitor of Qlik Replicate (E): The Monitor feature of Qlik Replicate allows users to view and manage log files.Users can access the Log Viewer from the Server Logging Levels or File Transfer Service Logging Level sub-tabs1.
The other options provided do not align with the locations where log files can be read in Qlik Replicate:
A: In Windows Event log: This is not a location where Qlik Replicate log files are stored.
C: In External monitoring tool: While external monitoring tools can be used to read log files, they are not a direct feature of Qlik Replicate for reading log files.
F: In Enterprise Manager: The Enterprise Manager is a separate component that may manage and monitor multiple Qlik Replicate instances, but it is not where log files are directly read.
Therefore, the verified answers areB,D, andE, as they represent the locations within Qlik Replicate where log files can be accessed and read21.
NEW QUESTION # 50
The Qlik Replicate administrator adds a new column to one of the tables in a task What should the administrator do to replicate this change?
- A. Change the DDL Handling Policy to accommodate this change
- B. Stop task, enable__CT tables, and resume
- C. Stop and resume the task
- D. Stop and reload the task
Answer: C
Explanation:
When a new column is added to one of the tables in a Qlik Replicate task, the administrator should stop and then resume the task to replicate this change. This process allows Qlik Replicate to recognize the structural change and apply it accordingly.
The steps involved in this process are:
Stop the task: This ensures that no data changes are missed during the schema change.
Resume the task: Once the task is resumed, Qlik Replicate will pick up the DDL change and apply the new column to the target system.
This procedure is supported by the Qlik Replicate's DDL handling policy, which can be set to perform an
"alter target table" when the source table is altered.This means that when the task is resumed, the new columns from the source tables will be added to the Replicate target1.
It's important to note that while stopping and resuming the task is generally the recommended approach, the exact steps may vary depending on the specific configuration and version of Qlik Replicate being used.
Therefore, it's always best to consult the latest official documentation or support resources to ensure the correct procedure for your environment.
NEW QUESTION # 51
Which is the path to add a new column to a single table in a task?
- A. New Transformation -> Column -> Add Column
- B. Table Settings -> General -> Add New Column
- C. Table Selection -> Schemas -> Add Column
- D. Select Table -> Transform -> Add New
Answer: B
Explanation:
To add a new column to a single table in a Qlik Replicate task, the correct path is throughTable Settings.
Here's the process you would typically follow:
Navigate to theTable Settingsof the table you wish to modify within your task.
Go to theGeneralsection.
Use the option toAdd New Column.
This process allows you to add a column directly to the table's schema as part of the task configuration. It's important to note that this action is part of the task's design phase, where you can specify the schema changes that should be applied to the data as it is replicated.
The other options listed, such asNew TransformationorSelect Table -> Transform, are not the direct paths for adding a new column to a table's schema within a task.They are related to different aspects of task configuration and transformation1.
NEW QUESTION # 52
How can a source be batch-loaded automatically on a daily basis?
- A. Set trigger through Advanced Run options
- B. Set trigger through Task Designer
- C. Enable task on full load and apply changes
- D. Set trigger through server scheduler
Answer: D
Explanation:
To batch-load a source automatically on a daily basis in Qlik Replicate, you would typically use a server scheduler. Here's how it can be done:
Set trigger through server scheduler (A): You can configure a scheduler on the server where Qlik Replicate is running to trigger the batch load process at a specified time each day.This could be done using the operating system's built-in task scheduler, such as Windows Task Scheduler or cron jobs on Linux systems1.
The scheduler would execute a command or script that starts the Qlik Replicate task configured for batch loading.The command would utilize Qlik Replicate's command-line interface or API to initiate the task1.
This approach allows for precise control over the timing of the batch load and can be adjusted to meet the specific scheduling requirements of the data replication process1.
The other options provided are not typically used for setting up an automatic daily batch load:
B: Set trigger through Advanced Run options: While Advanced Run options provide various ways to run tasks, they do not include a scheduling function for daily automation.
C: Set trigger through Task Designer: Task Designer is used for designing and configuring tasks, not for scheduling them.
D: Enable task on full load and apply changes: This option would start the task immediately and is not related to scheduling the task on a daily basis.
Therefore, the verified answer isA. Set trigger through server scheduler, as it is the method that allows for the automation of batch loading on a daily schedule1.
NEW QUESTION # 53
Which information will be downloaded in the Qlik Replicate diagnostic package?
- A. Logs, Statistics, Task Status
- B. Endpoint Configuration. Task Settings. Permissions
- C. Logs. Statistics. Task Status, Metadata
- D. Endpoint Configuration. Logs. Task Settings
Answer: C
Explanation:
The Qlik Replicate diagnostic package is designed to assist in troubleshooting task-related issues. When you generate a task-specific diagnostics package, it includes the task log files and various debugging data. The contents of the diagnostics package are crucial for the Qlik Support team to review and diagnose any problems that may arise during replication tasks.
According to the official Qlik documentation, the diagnostics package contains:
Task log files
Various debugging data
While the documentation does not explicitly list "Statistics, Task Status, and Metadata" as part of the diagnostics package, these elements are typically included in the debugging data necessary for comprehensive troubleshooting.Therefore, the closest match to the documented contents of the diagnostics package would be option C, which includes Logs, Statistics, Task Status, and Metadata123.
It's important to note that the specific contents of the diagnostics package may vary slightly based on the version of Qlik Replicate and the nature of the task being diagnosed. However, the provided answer is based on the most recent and relevant documentation available.
NEW QUESTION # 54
How can a Qlik Replicate administrator set all Incoming columns to match a single schema?
- A. Global Transformations - Add Filter
- B. Table Selection - Schema
- C. Add Filter - Schema
- D. Global Transformations - Schema
Answer: D
Explanation:
To set all incoming columns to match a single schema in Qlik Replicate, an administrator should use the Global Transformationsfeature. Here's the process:
Navigate to theGlobal Transformationssection within the Qlik Replicate task settings.
Within Global Transformations, there is an option to define transformations that apply to all tables and columns being replicated.
Use theSchemaoption within Global Transformations to specify the target schema for all incoming columns.
This approach ensures that all incoming data conforms to a predefined schema, which is particularly useful when consolidating data from multiple sources into a single target schema.It allows for the standardization of column names, data types, and other schema-related attributes across all tables involved in the replication task12.
The other options provided do not directly address the requirement to set all incoming columns to match a single schema:
A: Table Selection - Schema: This option is more about selecting which tables and schemas to include in the replication task, rather than defining a global schema for all columns.
B: Global Transformations - Add FilterandC. Add Filter - Schema: While filters are used to specify conditions for data transformation or selection, they do not provide a means to globally set the schema for all incoming columns.
Therefore, the verified answer isD. Global Transformations - Schema, as it is the correct method to set all incoming columns to match a single schema in Qlik Replicate12.
NEW QUESTION # 55
Which open API methods are supported in Qlik Enterprise Manager?
- A. HTTP APIs. REST SDK. Python SDK
- B. REST SDK. NET SDK. Python SDK
- C. JavaScript. REST SDK. NET SDK
- D. gcloud. NET SDK. Python SDK
Answer: B
Explanation:
Qlik Enterprise Manager supports a range of open API methods that allow for programmatic interaction with the system. The supported API methods are:
REST SDK: This provides a RESTful interface for interacting with Qlik Enterprise Manager, allowing for operations such as viewing task details, running tasks, and exporting or importing task definitions12.
.NET SDK: The .NET SDK enables developers to use .NET languages to interact with Qlik Enterprise Manager, facilitating integration with other .NET applications3.
Python SDK: The Python SDK allows for scripting and automation of tasks in Qlik Enterprise Manager using Python, which is particularly useful for data scientists and analysts who prefer Python for data-related tasks3.
These API methods enable automation, integration with enterprise dashboards, and the ability to perform batch operations, among other tasks3.Therefore, the correct answer isC. REST SDK, .NET SDK, Python SDK, as these are the open API methods supported by Qlik Enterprise Manager3.
NEW QUESTION # 56
How should missing metadata be added in a Qlik Replicate task after the task has been stopped?
- A. Under Advanced Run option choose metadata only, stop task again, and then resume processing
- B. Drop tables and data on the target side, run advanced option, create metadata, and then resume task
- C. Under Advanced Run option choose reload target, stop task again, and then resume processing
- D. Drop tables or delete tables and data on target side, then run task from a certain timestamp
Answer: A
Explanation:
If a task has missing metadata, you need to first stop the task.
Navigate to the "Advanced Run" options.
Select the option "Metadata Only."
Start the task with this setting to process the missing metadata.
Stop the task again after the metadata is added.
Resume normal task processing. This procedure ensures that only the metadata is processed without affecting the existing data on the target side. This method is recommended in Qlik Replicate documentation for handling missing metadata issues.
To add missing metadata in a Qlik Replicate task after the task has been stopped, the correct approach is to use the Advanced Run option for metadata only. Here's the process:
Select the task that requires metadata to be added.
Go to theAdvanced Runoptions for the task.
Choose theMetadata Onlyoption, which has two sub-options:
Recreate all tables and then stop: This will rebuild metadata for all available tables in the task.
Create missing tables and then stop: This will rebuild metadata only for the missing tables or the tables that were newly added to the task1.
By selecting theMetadata Onlyoption and choosing to create missing tables, you can ensure that the metadata for the newly added tables is updated without affecting the existing tables and data. After this operation, you can stop the task again and then resume processing.
The other options provided are not the recommended methods for adding missing metadata:
AandDsuggest dropping tables or data, which is not necessary for simply adding metadata.
Bsuggests reloading the target, which is not the same as updating metadata only.
Therefore, the verified answer isC, as it accurately describes the process of adding missing metadata to a Qlik Replicate task using the Advanced Run options1.
NEW QUESTION # 57
A Qlik Replicate administrator will use Parallel load during full load Which three ways does Qlik Replicate offer? (Select three.)
- A. Select specific tables and columns
- B. Use Partitions - Use all partitions - Use main\sub-partitions
- C. Use Partitions - Specify partitions\sub-partitions
- D. Use Time and Date Ranges in the date and time columns
- E. User chooses a list of columns and set of values that define ranges
- F. Use Data Ranges
Answer: B,C,F
Explanation:
Qlik Replicate offers several methods for parallel load during a full load process to accelerate the replication of large tables by splitting the table into segments and loading these segments in parallel. The three primary ways Qlik Replicate allows parallel loading are:
Use Data Ranges:
This method involves defining segment boundaries based on data ranges within the columns.
You can select segment columns and then specify the data ranges to define how the table should be segmented and loaded in parallel.
Use Partitions - Use all partitions - Use main/sub-partitions:
For tables that are already partitioned, you can choose to load all partitions or use main/sub-partitions to parallelize the data load process. This method ensures that the load is divided based on the existing partitions in the source database.
Use Partitions - Specify partitions/sub-partitions:
This method allows you to specify exactly which partitions or sub-partitions to use for the parallel load. This provides greater control over how the data is segmented and loaded, allowing for optimization based on the specific partitioning scheme of the source table.
These methods are designed to enhance the performance and efficiency of the full load process by leveraging the structure of the source data to enable parallel processing
NEW QUESTION # 58
......
Qlik QREP Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Verified QREP Exam Dumps Q&As - Provide QREP with Correct Answers: https://www.test4cram.com/QREP_real-exam-dumps.html