Test4Cram HPE0-S59 dumps & HPE Technical Sure Practice with 118 Questions
New HPE0-S59 Exam Questions| Real HPE0-S59 Dumps
HPE Apollo systems are high-performance computing solutions that are optimized for big data, analytics, and artificial intelligence workloads. The HPE0-S59 exam covers topics such as HPE Apollo architecture, management, and deployment. HPE SimpliVity solutions provide hyperconverged infrastructure that combines compute, storage, and networking in a single solution. HPE0-S59 exam covers topics such as HPE SimpliVity architecture, management, and deployment. Overall, the HP HPE0-S59 (HPE Compute Solutions) Exam is an important certification for IT professionals who work with HPE compute solutions.
HP HPE0-S59 (HPE Compute Solutions) Exam is designed to assess an individual's knowledge and skills related to HPE compute solutions. HPE0-S59 exam is intended for professionals who are responsible for designing, deploying, and managing HPE compute solutions in enterprise environments. HPE0-S59 exam focuses on various topics such as HPE compute solutions architecture, HPE ProLiant servers, HPE BladeSystem, HPE Synergy, HPE OneView, and more.
NEW QUESTION # 70
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
Explanation:
To check the Core Analysis Engine (CAE) Log on the HPE Superdome Flex 280, navigate to the Logs section in the management interface. This section provides access to various logs, including system, security, and diagnostic logs, which encompass the CAE logs necessary for detailed analysis and troubleshooting.
NEW QUESTION # 71
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. To use interconnect bay set 3, all compute nodes must be half-height
- B. Both master modules are located in the same HPE Synergy frame
- C. For the given downlink speed, the maximum number of frames is reached
- D. The master modules are located in the interconnect bays 2 and 5
Answer: A
Explanation:
In HPE Synergy configurations, when using interconnect bay set 3, it implies that the compute nodes should be half-height. This is because bay set 3 is typically utilized in configurationswhere half-height compute nodes are used to ensure proper alignment and connectivity within the Synergy frame.
NEW QUESTION # 72
After HPE Superdome Flex deployment and nPar setup, you need to verify health status of HPE Superdome Flex components.
Put the steps on the left into the coned order on the right to perform this task.
Answer:
Explanation:
Explanation:
A close up of a document Description automatically generated
* Open SSH client:Begin by opening an SSH client on your computer. This client will be used to establish a secure connection to the Rack Management Controller (RMC).
* Open session to RMC:Use the SSH client to open a session to the RMC. The RMC is the central management component for the HPE Superdome Flex system.
* Enter show health command:Once connected to the RMC, enter theshow healthcommand. This command will provide detailed information about the health status of various components within the Superdome Flex system.
* Confirm health status:Review the output of theshow healthcommand to confirm the health status of the Superdome Flex components. This step ensures that all components are functioning correctly and identifies any potential issues.
NEW QUESTION # 73
What is important to consider when setting up RAID configurations in an HPE server?
- A. Matching RAID controllers with server brands
- B. The RAID level's suitability for the data requirement
- C. The color scheme of RAID controllers
- D. The visual arrangement of RAID arrays
Answer: B
NEW QUESTION # 74
Click the area within the iLO management interface that will allow you to access workload Advisor.
Answer:
Explanation:
Explanation:
The Performance section within the iLO management interface provides access to the Workload Advisor.
This feature offers insights and analytics regarding the server's performance, helping to optimize workloads and manage resources efficiently.
NEW QUESTION # 75
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets.
Which HPE compute system meets the customer requirements?
- A. HPE ProLiant OL380 Gen 10 Plus
- B. HPE Synergy 480 Gen10 Plus
- C. HPE ProLiant DL580 Gen10
- D. HPE Superdome Flex system
Answer: D
Explanation:
The HPE Superdome Flex system is the only HPE compute system that supports up to 16 CPU sockets, making it suitable for customers who require a hardware platform with such high scalability. The Superdome Flex is designed for mission-critical workloads and provides exceptional scalability and performance.
NEW QUESTION # 76
What approach should be taken for resolving BIOS-related problems on an HPE server?
- A. Updating the BIOS to the latest version, if applicable
- B. Changing the BIOS color scheme
- C. Altering the server's location for better energy flow
- D. Focusing on the BIOS brand
Answer: A
NEW QUESTION # 77
One of the administrators added some connections within a server profile that was created using a template.
This server profile did not report inconsistency.
What is the most likely reason for this behavior?
- A. The administrator removed FC connections that are not monitored by default.
- B. The server is in maintenance mode and does not report any issues.
- C. Connections defined in the server profile are not monitored for compliance.
- D. Consistency check for connections is set to Minimum or Not checked.
Answer: D
NEW QUESTION # 78
Your customer plans to deploy a VMware ESXi with HPE Synergy platform.
They plan to use Distributed Switches and DRS cluster.
You are preparing a proposal with the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- an appropriate number of the vSphere Standard licenses for each
compute node
- one HPE D3940 Storage Modules with 40 SSDs
- all required cables and options
Which statement about this proposal is true?
- A. vSphere Standard licenses should be replaced with Enterprise Pius licenses to enable requested features
- B. 2 additional HPE Synergy 480 Gen10 Plus compute modules can be added to this setup
- C. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drive.
- D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
Answer: A
Explanation:
The VMware vSphere Standard license does not include support for advanced features like Distributed Resource Scheduler (DRS) and Distributed Switches. These features are available only with the vSphere Enterprise Plus license. Therefore, to meet the customer's requirement of using Distributed Switches and a DRS cluster, the proposal should include vSphere Enterprise Plus licenses instead of Standard licenses.
NEW QUESTION # 79
Hotspot Question
Click the option that will allow you to update the HPE Synergy logical enclosure firmware.
Answer:
Explanation:
Explanation:
The HPE OneView for vCenter plugin enables management tasks such as firmware updates for HPE Synergy, including initiating and monitoring firmware baselines applied to logical enclosures.
NEW QUESTION # 80
Which statement about HPE Superdome nPars is true?
- A. Chassis in the same nPar can have different memory configuration
- B. Rack Management Controller is required Tor nPar configuration
- C. nPars are supported only with 3rd Generation Intel Xeon Scalable Processors
- D. Chassis in the same nPar can have different CPU configuration
Answer: B
Explanation:
The Rack Management Controller (RMC) is a critical component for configuring nPartitions (nPars) in HPE Superdome systems. The RMC provides the necessary control and management interfaces to define and manage nPars, ensuring proper allocation of resources and isolation of workloads.
NEW QUESTION # 81
Your customer uses HPE OneView to manage their HPE Synergy environment. They plan to use it to manage a new set equipment that includes.
- 20 HPE ProLiant DL365 Gen10 Plus servers
- 20 HPE ProLiant DL380 Gen10 Plus servers
- 5 HPE Primera 650
- 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)
- A. HPE Primera 650 can be managed using HPE OneView.
- B. HPE MSA 2062 Storage Array is not supported in HPE OneView
- C. HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included
- D. HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView
- E. HPE OneView replaces array management tools for both types of array
Answer: A,B
Explanation:
* HPE MSA 2062 Storage Array is not supported in HPE OneView:HPE OneView does not provide management capabilities for the HPE MSA series, which includes the MSA 2062. These arrays must be managed using their dedicated management tools.
* HPE Primera 650 can be managed using HPE OneView:HPE OneView supports the management of HPE Primera storage arrays, including the Primera 650, allowing for integrated management and monitoring within the OneView environment.
NEW QUESTION # 82
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets Which HPE compute system meets the customer requirements?
- A. HPE Superdome Flex system
- B. HPE ProLiant OL380 Gen 10 Plus
- C. HPE Synergy 480 Gen10 Plus
- D. HPE ProLiant DL580 Gen10
Answer: C
NEW QUESTION # 83
Your customer plans to manage HPE Primera using HPE Oneview
Which storage management tasks can be completed using HPE OneView for this environment?
- A. Volume provisioning
- B. Cache management
- C. CPG management
- D. Replication setup
Answer: A
Explanation:
HPE OneView allows for several storage management tasks when managing HPE Primera, including volume provisioning. This task involves creating and managing storage volumes that can be allocated to compute nodes and applications within the environment. HPE OneView streamlines this process, providing a centralized management interface.
NEW QUESTION # 84
Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules.
What must you be aware of regarding utilization sampling for the new modules?
- A. For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied
- B. For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled
- C. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.
- D. Utilization sampling works the same way tor any type of HPE Synergy interconnect modules
Answer: B
Explanation:
For HPE Virtual Connect Fibre Channel (VC FC) modules, utilization sampling is always enabled by default and cannot be disabled. This feature ensures continuous monitoring of the module's performance and utilization, providing valuable insights for managing the Fibre Channel network.
NEW QUESTION # 85
Put the steps of the HPE infosight flow in the correct order.
Answer:
Explanation:
Explanation:
(observing, learning, predicting, recommending, acting)
* Observing:The first step involves collecting and monitoring data from the infrastructure. HPE InfoSight continuously gathers telemetry data from various components, including storage, compute, and networking devices.
* Learning:In this step, the collected data is analyzed to identify patterns and trends. Machine learning
* algorithms process the data to understand the normal behavior of the system and detect anomalies.
* Predicting:Based on the learned patterns, HPE InfoSight can predict potential issues before they occur.
This predictive analysis helps in identifying areas that might cause problems in the future.
* Recommending:After predicting potential issues, HPE InfoSight provides actionable recommendations to prevent or resolve these issues. These recommendations are based on best practices and the vast amount of data analyzed by InfoSight.
* Acting:Finally, the recommendations are implemented to optimize the performance and reliability of the infrastructure. This step may involve configuring settings, applying updates, or other actions to maintain the health of the system.
NEW QUESTION # 86
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- B. The customer can add one D3940 storage Module to each of the frames
- C. To use all compute nodes, the customer must create at least two logical enclosures
- D. To manage all frames, the customer must buy two additional HPE Composer 2 modules
Answer: A
NEW QUESTION # 87
Which statement about an HPE Oneview support dump is true?
- A. Support dump can be created if HPE Virtual Connect modules are installed in the frame
- B. Appliance support dump by default contains a logical enclosure support dump
- C. Support dump is a binary file that can be opened only in a dedicated application
- D. Preview support dump is available only when creating an appliance support dump
Answer: C
NEW QUESTION # 88
Your customer is trying to grow a VMware duster using HPE OneView for VMware vCenter Server.
They get an error and cannot proceed.
Which tool should you use to troubleshoot the problem?
- A. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.
- B. HPE One View for VMware vCenter Server to verify if server profile template s property imported and registered
- C. ILO interlace of a given HPE Synergy compute node to verify whether this node is registered within HPE Oneview.
- D. vCenter Server to verify if an OS Bund Plans property defined and has ESXi image uploaded
Answer: B
Explanation:
When encountering an error while growing a VMware cluster using HPE OneView for VMware vCenter Server, it is crucial to verify that the server profile template is properly imported and registered in HPE OneView. This ensures that the necessary configurations and settings are correctly applied to the new compute nodes being added to the cluster.
NEW QUESTION # 89
Which compute node parameters are captured within server hardware type?
- A. Number of the CPUs
- B. Size of the memory Installed
- C. installed operating system
- D. Mezzanine card configuration
Answer: C
Explanation:
The server hardware type in HPE OneView captures parameters such as the mezzanine card configuration. This information is crucial for defining the connectivity and expansion capabilities of the compute node, ensuring that the appropriate resources are available for specific workloads.
NEW QUESTION # 90
A junior architect designed a solution based on HPE Synergy that must meet the following requirements:
* Support at least 30 HPE Synergy 480 Gen10 Plus compute modules
* Interconnect modules must provide MAC and WWN virtualization
* All HPE Synergy frames must formulate a single management entity
* The management appliance should not be a single point of failure
* Connectivity to FC array should be available to all compute nodesThe proposal consists of:
* 3 HPE Synergy 12000 frames
* 6 HPE Composer 2 modules
* 2 HPE Virtual Connect SE 100Gb F32 Module
* 4 HPE Synergy 50Gb Interconnect Link ModuleWhich statements about this proposed design are true?
(Select two)
- A. The selected interconnect modules do not provide the requested WWN virtualization.
- B. Remove 4 HPE Composer 2 modules from the design, as they are not required.
- C. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules.
- D. FC upgrade licenses for HPE Virtual Connect SE 100Gb F32 Module must be added.
- E. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100Gb F32 modules.
Answer: A,B
NEW QUESTION # 91
......
Briefly explain the Best Solution for the preparation for the HP HPE0-S59 Exam
The best solution for the preparation for HP HPE0-S59 exam is to get the HP HPE0-S59 study guide with practice questions. The HP HPE0-S59 study guide is one of the most effective ways to prepare for the certification test.
The HP HPE0-S59 practice questions are designed by experts and professionals in the field, who have years of experience in helping students pass their exams and acquire their certifications. Our HP HPE0-S59 exam dumps will help you to get certified with our dreamed certification.
The HP HPE0-S59 practice questions contain all the information required to help you pass your exam successfully. They include a variety of different question types that will help you to develop your skills, improve your knowledge, as well as make you familiar with the format of actual exams.
The HP HPE0-S59 study guide contains everything you need to know about your certification test and more!
HPE0-S59 Braindumps – HPE0-S59 Questions to Get Better Grades: https://www.test4cram.com/HPE0-S59_real-exam-dumps.html
Get New HPE0-S59 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1Dr0rZVxJMHxwUu4W5LkaDQKip5jyRZMt