200-101 Practice Test Questions Answers Updated 60 Questions
200-101 dumps & Marketing Science Professional Sure Practice with 60 Questions
Facebook 200-101 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION 11
What does a router do if it has no EIGRP feasible successor route to a destination network and the successor route to that destination network is in active status?
- A. It sends a multicast query packet to all adjacent neighbors requesting available routing paths to the destination network.
- B. It routes all traffic that is addressed to the destination network to the interface indicated in the routing table.
- C. It sends a copy of its neighbor table to all adjacent routers.
- D. It broadcasts Hello packets to all routers in the network to re-establish neighbor adjacencies.
Answer: A
NEW QUESTION 12
A start-up ecommerce brand that sells pet products wants to test campaign structure. It would like to determine if it should have separate ad sets targeting different pet interest groups or consolidate all interest groups into one ad set.
The brand sets up a multi-cell Conversion Lift test for one month. At the end of the test, no results are available to review, due to insufficient statistical power.
Which two approaches should the analyst recommend? (Choose 2)
- A. Run a multi-cell Conversion Lift test with an increased holdout percentage
- B. Run a multi-cell Conversion Lift with fewer interest groups
- C. Run a campaign-level A/B test instead
- D. Review campaign results in Ads Manager instead
Answer: A,C
NEW QUESTION 13
A travel company wants to know if it gets additional conversions by relying only on its direct response strategies, as opposed to combining each strategy with branding campaigns. The company continuously keeps track of each strategy's performance, but it measures them separately. Also, each strategy's measurement has its own KPI. These are the latest results:
* Branding campaigns:
* A benchmark of 35 Brand Lift tests, SI.70 USD per additional ad recaller
* An average of 125 conversions per campaign
* Direct response campaigns:
; A benchmark of 20 Lift tests, $2.50 USD per Conversion Lift - An average of 370 conversions per campaign
What should the company do to test if it gets more incremental conversions from relying only on direct response strategies?
- A. Run both strategies at the same time and compare the conversions
- B. Review last-touch attribution model
- C. Set up an A/B test comparing both strategies
- D. Build a test based on a multi-cell experimental design
Answer: A
NEW QUESTION 14
Which Layer 2 protocol encapsulation type supports synchronous and asynchronous circuits and has built-in security mechanisms?
- A. Frame Relay
- B. HDLC
- C. PPP
- D. X.25
Answer: C
Explanation:
High-Level Data Link Control (HDLC) - HDLC is the default encapsulation type on point-to-point, dedicated links, and circuit-switched connections. It is used typically when communicating between two Cisco devices. It is a bit-oriented synchronous data link layer protocol. Point-to-Point Protocol (PPP) - Provides router-to-router and host-to network connections over synchronous and asynchronous circuits. PPP was designed to work with several network layer protocols, such as IP, and IPX. PPP also has built in security mechanisms such as PAP and CHAP X.25/Link Access Procedure, Balanced (LAPB) - ITU-T standard that defines how connections between DTE and DCE are maintained for remote terminal access and computer communications in public data networks. X.25 specifies LAPB, a data line layer protocol. X.25 is a predecessor to Frame Relay. Frame Relay - Industry standard, switched data link layer protocol that handles multiple virtual circuits. It is a next-generation to X.25 that is streamlined to eliminate some of the time-consuming processes (such as error correction and flow control) that were employed in X.25.
NEW QUESTION 15
Refer to the exhibit.
Given the output shown from this Cisco Catalyst 2950, what is the reason that interface
FastEthernet 0/10 is not the root port for VLAN 2?
- A. This switch is running RSTP while the elected designated switch is running 802.1d Spanning Tree.
- B. This switch has more than one interface connected to the root network segment in VLAN 2.
- C. This switch has a lower bridge ID for VLAN 2 than the elected designated switch.
- D. This switch interface has a higher path cost to the root bridge than another in the topology.
Answer: D
NEW QUESTION 16
After the network has converged, what type of messaging, if any, occurs between R3 and R4?
- A. The routing table from each router is sent every 60 seconds.
- B. Hellos are sent every 10 seconds.
- C. The full database from each router is sent every 30 seconds.
- D. No messages are exchanged.
Answer: B
Explanation:
Explanation
HELLO messages are used to maintain adjacent neighbors so even when the network is converged, hellos are still exchanged. On broadcast and point-to-point links, the default is 10 seconds, on NBMA the default is 30 seconds.
NEW QUESTION 17
Which port state is introduced by Rapid-PVST?
- A. discarding
- B. forwarding
- C. learning
- D. listening
Answer: A
NEW QUESTION 18 
OSPF is configured using default classful addressing. With all routers and interfaces operational, how many networks will be in the routing table of R1 that are indicated to be learned by OSPF?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
- F. 5
Answer: A
Explanation:
NEW QUESTION 19
A CPG advertiser wants to determine how much ROI is provided by Facebook compared to other channels, like TV and online publishers. The advertiser runs a digita deep dive marketing mix modeling.
Refer to information from the test:
- A. Using the charts, what should an analyst recommend regarding Facebook?
- B. Keep media execution on Facebook between the minimum and max marginal threshold
- C. Maintain media execution on Facebook as usual
- D. Increase media execution on Facebook above the max ROI threshold
Answer: B
NEW QUESTION 20
What is the advantage of using a multipoint interface instead of point-to-point subinterfaces when configuring a Frame Relay hub in a hub-and-spoke topology?
- A. The multiple IP network addresses required for a multipoint interface provide greater addressing flexibility over point-to-point configurations.
- B. It avoids split-horizon issues with distance vector routing protocols.
- C. IP addresses can be conserved if VLSM is not being used for subnetting.
- D. A multipoint interface offers greater security compared to point-to-point subinterface configurations.
Answer: C
NEW QUESTION 21
At which layer of the OSI model does PPP perform?
- A. Layer 4
- B. Layer 5
- C. Layer 3
- D. Layer 2
Answer: D
Explanation:
Point-to-Point Protocol (PPP) is adata linkprotocolcommonly used in establishing a direct connection between twonetworking nodes. It can provide connectionauthentication, transmissionencryption(usingECP,RFC 1968), andcompression.
NEW QUESTION 22
What are three reasons that an organization with multiple branch offices and roaming users might implement a Cisco VPN solution instead of point-to-point WAN links? (Choose three.)
- A. increased security
- B. reduced cost
- C. reduced latency
- D. broadband incompatibility
- E. scalability
- F. better throughput
Answer: A,B,E
Explanation:
Enhance Productivity and Cut Costs Cisco VPN solutions provide exceptional security through encryption and authentication technologies that protect data in transit from unauthorized access and attacks. A Cisco VPN helps you: Use highly secure communications, with access rights tailored to individual users Quickly add new sites or users, without significantly expanding your existing infrastructure Improve productivity by extending corporate networks, applications, and collaboration tools Reduce communications costs while increasing flexibility
NEW QUESTION 23
Which protocol provides a method of sharing VLAN configuration information between two Cisco switches?
- A. VTP
- B. RSTP
- C. 802.1Q
- D. STP
Answer: A
Explanation:
Understanding VLAN Trunk Protocol (VTP) http://www.cisco.com/en/US/tech/tk389/tk689/technologies_tech_note09186a0080094c52.shtml
Introduction VLAN Trunk Protocol (VTP) reduces administration in a switched network. When you configure a new VLAN on one VTP server, the VLAN is distributed through all switches in the domain. This reduces the need to configure the same VLAN everywhere. VTP is a Cisco-proprietary protocol that is available on most of the Cisco Catalyst series products.
NEW QUESTION 24
Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links.
R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also
connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.
Router R6 does not form an EIGRP neighbor relationship correctly with router R1. What is the cause for this misconfiguration?
- A. The network command is missing.
- B. The K values mismatch.
- C. The AS does not match.
- D. The passive-interface command is enabled.
Answer: A
Explanation:
The link from R1 to R6 is shown below:
As you can see, they are both using e0/0. The IP addresses are in the 192.168.16.0 network:
But when we look at the EIGRP configuration, the "network 192.168.16.0" command is missing on R6.
Study the following output taken on R1:
R1# Ping 10.5.5.55 source 10.1.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.5.5.55, timeout is 2 seconds:
Packet sent with a source address of 10.1.1.1
.......
Success rate is 0 percent (0/5)
NEW QUESTION 25
What are two enhancements that OSPFv3 supports over OSPFv2? (Choose two.)
- A. It can support multiple IPv6 subnets on a single link.
- B. It supports up to 2 instances of OSPFv3 over a common link.
- C. It requires the use of ARP.
- D. It routes over links rather than over networks.
Answer: A,D
NEW QUESTION 26
Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links.
R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also
connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.
Which path does traffic take from R1 to R5?
- A. The traffic is equally load-balanced over R2 and R3.
- B. The traffic goes through R2.
- C. The traffic goes through R3.
- D. The traffic is unequally load-balanced over R2 and R3.
Answer: B
Explanation:
Using the "show ip int brief command" on R5 we can see the IP addresses assigned to this router. Then, using the "show ip route" command on R1 we can see that to reach 10.5.5.5 and 10.5.5.55 the preferred path is via Serial 1/3, which we see from the diagram is the link to R2.
NEW QUESTION 27
Refer to the exhibit.
Which WAN protocol is being used?
- A. ATM
- B. Frame Relay
- C. HDLC
- D. PPP
Answer: B
Explanation:
"Show interface pos8/0/0" command showing LMI enq sent which show frame-relay encapsulation enabled on this interface.Cisco supports three different Local Management Interface (LMI) types for Frame Relay: Cisco, ANSI Annex D, and Q933-A Annex A http://www.ciscopress.com/articles/article.asp?p=170741&seqNum=3
NEW QUESTION 28
Refer to the exhibit.
A technician has configured the FastEthernet 0/1 interface on Sw11 as an access link in VLAN 1. Based on the output from the show vlan brief command issued on Sw12, what will be the result of making this change on Sw11?
- A. Hosts will not be able to communicate between the two switches.
- B. The hosts in all VLANs on the two switches will be able to communicate with each other.
- C. Only the hosts in VLAN 10 and VLAN 15 on the two switches will be able to communicate with each other.
- D. Only the hosts in VLAN 1 on the two switches will be able to communicate with each other.
Answer: A
Explanation:
VLANs are local to each switch's database, and VLAN information is not passed between switches without implementing VLAN Trunk Protocol (VTP). Trunks carry traffic from all VLANs to and from the switch by default but, can be configured to carry only specified VLAN traffic. Trunk links are required to pass VLAN information between switches. So Sw11 port should be trunk not access port. Additionally, there are no ports assigned to VLAN 1.
NEW QUESTION 29
Refer to the exhibit.
What address is a feasible successor?
- A. 172.16.4.0
- B. 10.1.4.4
- C. 172.16.3.0
- D. 10.1.2.2
Answer: D
NEW QUESTION 30
......
New 200-101 Exam Questions| Real 200-101 Dumps: https://www.test4cram.com/200-101_real-exam-dumps.html