301a Premium Exam Engine - Download Free PDF Questions
Instant Download 301a Free Updated Test Dumps
How to book the F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
Register or log in on F5 Network website, or visit the Candidate Portal, or contact F5 Certification for more information.
Who should take the F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
People who choose to receive an F5 Professional Certification, which certifies their abilities to manipulate the whole device stack, from standard network experience to specialized application-layer awareness, and the ability to combine the two realms. Candidates should be familiar with network fundamentals, protocols, and general traffic control principles. The student should also be familiar with the basics of F5 technologies as they pertain to network fundamentals, protocols, and traffic control. Test4Cram provides applicants with validated questions and correct responses that would be asked throughout their final test. As a result, candidates are more likely to achieve high scores on the final test, and one of the best things is that we even have F5 301a exam dumps in PDF format, which candidates can import and review offline.
The following knowledge/abilities are required of candidates:
- Describe the Open Systems Interconnection (OSI) model's seven layers.
- Describe HTTP's legitimate uses and processes.
- Describe the benefits of using a complete device proxy.
- Recognize and identify the TMOS elements (F5 Traffic Management Operating System).
The F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam certification is a globally recognized credential that certifies individuals as F5 Certified Technology Specialists. If an applicant wishes to advance in their profession, they must develop their experience, qualifications, and abilities. This specialized expertise and ability is shown by the F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam qualification. If an applicant has passed the F5 LTM Specialist: Architect, Setup, and Deploy 301a Exam and has knowledge of the related technology and skills needed to pass the F5 BIG-IP Local Traffic Manager (LTM) Specialist: Maintain & Troubleshoot 301a Exam, he can take this exam.
NEW QUESTION 21
Six servers have a varying number of connections that change based on the user load.
Which load balancing method should an LTM Specialist apply to divided the web application traffic to the servers on the relative performance trend?
- A. Ratio
- B. Predictive
- C. Least Sessions
- D. Least Connections
Answer: B
NEW QUESTION 22
Exhibit.
An LTM Specialist needs to configure VS^HTTP and VS_DB for an online shopping site. The VS HTTP passes the client requests to the webservers. The webservers query the database servers through the VS_DB. Initially, the LTM Specialist finds the database servers directly return the packets to the webservers.
which setting must be enabled for the configuration to function correctly?
- A. VS_DB snat auto map
- B. VS_HTTP snat auto map
- C. VS DB auto last hop
- D. VS.HTTP auto last hop
Answer: C
NEW QUESTION 23
AN LTM Specialist is setting up a new HTTPS virtual server to decrypt client traffic. SNAT the traffic and send the encrypted traffic to the poor member, the client's IP address must be included in the traffic sent to the pool member.
What is a complete set of profiles that must be configured for the virtual server to meet these requirements?
- A. TCP, Client SSL, Server SSL
- B. TCP, Client SSL, Server SSL, HTTP
- C. TCP, Client SSL, HTTP
- D. TCP , Server SSL, HTTP
Answer: B
NEW QUESTION 24
An TLM Specialist has an Exchange that must use the LTM device to route traffic to the internet.
Which SNAT/NAT configure allows the Exchange server's traffic access the internet through the LTM device?
- A. SNAT Automap
- B. SNAT Pool
- C. NAT
- D. SNAT List
Answer: D
NEW QUESTION 25
An LTM is configure an application that is separated into several subdomains across multiple virtual servers. Many of these subdomains require encryption and could be accessed by anyone on the internet. The configuration must NOT result in SSL warnings to end users.
How should the LTM Specialist configure the SSL profiles for these virtual servers?
- A. Obtain an SSL certificate for each subdomain, make a ServerSSL profile for each subdomain, and apply to the related SSL Virtual Server.
- B. Create a self-singed SSL certificate for each subdomain make a ClientSSL profile for each subdomain, and apply to the related SSL Virtual server
- C. Obtain a wildcard certificate, create one ClientSSL profile and apply to all SSL Virtual Servers
- D. Create a self-singed SSL certificate for each subdomain make a Client profile for each SSL Virtual Server
Answer: C
Explanation:
The topic is that there are multiple domain names in the business, and HTTPS services are provided to the internet, and users cannot be allowed to generate SSL alarms. The require client ssl and use CA certificate instead of self-singed certificate. And multiple domain names, you can use wildcard certificates.
NEW QUESTION 26
An LTM Specialist is configuring a virtual server with an IP address.
Which configuration is unsupported?
- A. Performance 14 virtual server with an HTTP profile
- B. Performance 14 virtual server with a FastHTTP profile
- C. Standard virtual server with a TCP profile
- D. Standard virtual server with an HTTP profile
Answer: A
NEW QUESTION 27
An application is making heavy use of a large, high-quality JPEG image file. An LTM Specialist needs to enhance page load times without increasing server load.
Which profile should be applied to the virtual server to perform this task?
- A. Web Acceleration
- B. Response Adapt
- C. FastHTTP
- D. OneConnect
Answer: A
NEW QUESTION 28
An LTM Specialist is experiencing issues in a failover event. Certain long-lasting FTP event. Certain long-lasting FTP connections using a single node pool are forced to reconnect. The bigip.conf extract is shown:
What does the LTM Specialist need to change in the configuration to avoid this issue?
- A. persistence mirroring
- B. snatpool
- C. ftp profile
- D. connection mirroring
Answer: D
Explanation:
The stem mentions that it is a single server node, so there is no need to consider the factors of session maintenance. The actual requirement is to maintain the original connection status during failover. You need to configure connection mirroring to synchronize the connection status between the devices in the cluster in real time.
NEW QUESTION 29
Refer to the exhibit.
The LTM devices LTM3 and LTM2 have four Traffic Groups defined with approximately the sar of failover objects defined in each group.
- Traffic Groups A and C have Default Device set to LTM1
- Traffic Groups Band D have Default Device set to LTM2.
- Traffic Groups B and C do NOT have Auto Failback enabled. Traffic Groups A and D have Auto Failback enabled with a timeout value of 60 seconds.
- Traffic Groups A and D have Auto Fallback enabled with a timeout value of 60 seconds.
Both LTM devices are healthy and able to pass traffic for any Traffic Group.
LTM1 loses connectivity on interface 1.4. The LTM Specialists notified 60 seconds after the interface goes down.
What is the state of the Traffic Groups on each LTM device?
- A. LTM1: Traffic Groups A, B, C, and D
LTM2: No Traffic Groups - B. LTM1: No Traffic Groups
LTM2: Traffic Groups A, B, C, and D - C. LTM1: Traffic Groups B and C
LTM2: Traffic Groups A and 0 - D. LTM1: Traffic Group C
LTM2: Traffic Groups A, B, and 0
Answer: B
Explanation:
If the 1.4 port is down and failsafe is triggered, the whole machine will become a standby, and all Traffic Groups will be cut away, and no Traffic Group will remain.
NEW QUESTION 30
A virtual server with SNAT automap enabled selects pool member 10.20.0.10.443 for the server-side flow. The client side flow source IP is 192.168.0.10 .
Which source IP should be expected in the server-side connection?
- A. 10.20.0.2
- B. 10.20.0.1
- C. 10.50.0.2
- D. 192.168.0.10
Answer: A
NEW QUESTION 31
An LTM Specialist is configuring a new virtual server on an LTM device and assigning a SNAT pool that is already is use another virtual server. Both virtual servers use the same pool members to load balance traffic. A maximum of 35,000 users needs to be able to access each virtual server ta any time. The network architecture does NOT allow the backend servers to use the LTM device as a default gateway.
What is the minimum number of SNAT addresses required in the SNAT pool to meet the needs of the virtual servers?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Both vs share the same snat pool, and both use the same pool member. Then the concurrent number of snatpool will be added. For each VS, there is a maximum of 35,000 users, and those two VSs have a maximum of 70,000 users. The stem did not mention how many connections each user would have concurrently. Calculated with a minimum of 1 connection, then 70,000 connections would be concurrent. One IP can support 65,535 connection. Therefore, at least 2 or more snaptips are required
NEW QUESTION 32
An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.
Which values should the LTM Specialist enter for interval and timeout?
- A. Interval 10, timeout 30
- B. Interval 10, timeout 31
- C. Interval 30, timeout 91
The official recommendation is that timeout 3 times the interval value +1. - D. Interval 30, timeout 30
Answer: B
NEW QUESTION 33
An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP.
Which two custom TCP monitors should be selected as the pool's health monitors' (Choose two)
- A. a custom TCP monitor that works on port 9080 with 10.10.10.100 as alias address
- B. a custom TCP monitor that works on port 9080 with 10,10.10.101 as alias address
- C. a custom TCP monitor that works on port 8080 with 10.10.10.101 as alias address
- D. a custom TCP monitor that works on port 8080
- E. a custom TCP monitor that works on port 9080,
- F. a custom TCP monitor that works on port 8080 with 10.10.10.102 is alias address
Answer: A,D
NEW QUESTION 34
An LTM Specialist must reconfigure a BIG-IP LTM system that load balances traffic to web application servers. The application developer inform the LTM Specialist that TLS must be used to communicate with the application servers.
Which additional profile is required as part of virtual server configuration?
- A. SPDV profile
- B. Server SSL
- C. Client SSL
- D. Rewrite profile
Answer: B
NEW QUESTION 35
The picture belongs to static content, you can configure static content cache in FS to meet this demand An LTM Specialist must configure session persistence for a highly available, highly utilized web-based application.
* The following requirements are provided:
* http proxy setup for security
persistence information available to the HA peer in case of failover
The LTM Specialist needs to minimize additional burden on the LTM device to the greatest extent possible.
Which persistence profile should be used?
- A. Universal
- B. Source Address Affinity
- C. Cookie insert
- D. Destination Address Affinity
Answer: C
NEW QUESTION 36
A pool with a default connection limit is configured to use Round Robin as the load balancing method. An LTM Specialist needs to ensure that the LTM device selects a server with the fewest number of connections when new clients connect. Another pool is using the same set of backend servers.
Which load balancing-method should the pool be changed to?
- A. Least Connections
- B. Least Connections
- C. Weighted Least Connections (member)
- D. Weighted Least Connections (node]
Answer: B
NEW QUESTION 37
Refer to the exhibit.
An LTM Specialist configures the two syslog destination Syslog destination #1 can receive messages but the syslog destination #2 can NOT receive messages.
Which command sill correct the issue?
- A. {/Common)(tmos) # modify Ays syslog remote servers modify {syslog_dest2 {local- ip 10.208.102 254)}
- B. {/Common) (tmos) # modify /sys syslog remote-servers modify {syslog_dest2 {host 10 208.102.254 }}
- C. {/Common)(tmos) # modify /syssyslog remote-servers modify (syslog_dest2 {local-ip
- D. {Common(tmos) # modify/syslog remote-servers modify {syslog_dest2 {lost.10.10.10.28 }}
Answer: C
NEW QUESTION 38
An LTM device configuration is as shown:
An LTM device configuration is as shown
What should be the two expected outcomes based on this configuration? (Choose two.)
- A. A client session that has been idle for 48 minutes will be sent to the same pool members
- B. A client session that has been idle for 14 minutes will be balanced to a new pool member
- C. A client session that has been idle for 20 minutes will be balanced to a new pool member
- D. A client session that has been idle for 16 minutes will be sent to the same pool member
- E. A client session that has been idle for 12 minutes will be sent to the same pool member
Answer: C,E
NEW QUESTION 39
TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.
What is causing the change in failover state to occur?
- A. The HA network is using the default routing domain.
- B. The HA network latency is too high.
- C. The HA network is not configured for mirroring.
- D. The HA network is using multicast IP.
Answer: D
Explanation:
NEW QUESTION 40
Exhibit.
- The ITM devices LTM 1 and LTM2 are configured in Device Group X (Sync-Failover)
- LTM3 and LTM4 are configured in Device Group Y (Sync-Only)
- An LTM specialist configures Device Group Z (Sync-Only) to keep several profiles in (sync-Only) to keep several profiles in sync across all devices.
- Device GROUP X has four Traffic Groups A, B, C and D configured.
- Device Group Y has four Traffic Groups E, F, G, and H configured
- Auto Fallback IS NOT Enabled.
- Each Device group is healthy and able to pass traffic for any traffic group assigned to that Device Group.
The data center that contains LTM2 and LTM4 loses power. After 10 minutes; power is restored and all devices are up and healthy.
What is the state of each Traffic Group on each ITM device after power is restored?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option C
- D. Option B
Answer: B
NEW QUESTION 41
Remote users who access the LTM device are authenticated via Radius. The default remote user role is Guest Some users need LTM device with the Administrator role. The F5 Radius attributes are configure on the Radius server.
Which configuration item needs to be created?
- A. User account
- B. Admin account
- C. Remote User role
- D. User role
Answer: C
NEW QUESTION 42
An LTM Specialist needs to create an iRule that creates persistence records based on a JSESSIONID cookie. If a persistence record already exists, then the iRule must persist the client connection according to the existing record.
Which persistence profile enables the iRule to meet these requirements?
- A. Universal
- B. Source Address Affinity
- C. SSL
- D. Destination Address Affinity
- E. Cookie
Answer: A
NEW QUESTION 43
......
Difficulty in Attempting F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam
The qualification test would not be that daunting whether the consumer has completed the F5-301a practice exam and has been through the F5-301a exam dumps so the user has shown aptitude for interpreting complex procedures. Our professional team at Test4Cram advises that you take some notes on these subjects and practice the F5 301a exam dumps that we have published. All of these will help you pass this exam. This test is very complex for candidates who do not prepare during their training, and candidates would require access to a lab to practice. Then, in order to grasp the exam's contents, you'll need a lot of realistic experience. So, if someone is affiliated with some kind of company where he can train, but you can't afford the lab and don't have time to practice, As a result, the answer to this issue is Test4Cram. For your training, we give the best F5 301a exam dumps and practice exams. F5 301a test exam dumps to guarantee your results on the first try in the F5 Certified Technology Specialists Certification Exam. Our F5 301a exam dumps are regularly revised. Test4Cram offers a PDF and VCE file mix that will aid applicants in passing the test. Candidates will serve as an F5 Certified BIG-IP Administrator Network Engineer, F5 Certified BIG-IP Administrator Load Balancer/ADC, F5 Certified BIG-IP Administrator Architect, or F5 Certified BIG-IP Administrator Engineer after earning their F5 Certification. The candidate has the potential to raise $75,000 a month. Test4Cram provides applicants with validated questions and correct responses that would be asked throughout their final test. As a result, candidates are more likely to achieve high scores on the final test, and one of the best things is that we even have F5 301a exam dumps in PDF format, which candidates can import and review offline.
Free 301a Exam Braindumps F5 Pratice Exam: https://www.test4cram.com/301a_real-exam-dumps.html
Valid 301a FREE EXAM DUMPS QUESTIONS & ANSWERS: https://drive.google.com/open?id=1oxCyEpBmLkl2slVqeIs-xB_rHVG3GA2L