Check the Available JN0-104 Exam Dumps with 145 QA's UPDATED 2023
Download JN0-104 Exam Dumps Questions to get 100% Success in Juniper
Juniper JN0-104 exam is a comprehensive test that covers a wide range of topics related to Junos. Candidates will need to have a good understanding of routing and switching technologies, as well as the various protocols that are used in networking. They will also need to be familiar with the various Juniper Networks hardware components, including routers, switches, and firewalls.
NEW QUESTION # 51
Which attribute must be defined when configunng a non-root user in Junos OS?
- A. full-name
- B. class
- C. uid
- D. authentication
Answer: B
Explanation:
UID is optional (it is automatically set) whereas class is required: https://www.juniper.net/documentation/us/en/software/junos/user-access/topics/topic-map/junos-os-user-accounts.html
NEW QUESTION # 52
In which routing table would you find an OSPFv2 route?
- A. inet.ipv4
- B. inet.0
- C. ipv4-unicast
- D. inet.4
Answer: B
NEW QUESTION # 53
Which of these about routing tables are true? (Choose two)
- A. Multiple routing tables can be configured on Junos devices.
- B. Information learned from routing protocols is stored in the routing table.
- C. The default IPv4 unicast routing table is inet.4
- D. Routing table is populated from the forwarding table.
Answer: A,B
NEW QUESTION # 54
Which of these are Junos processes? (Choose two)
- A. BGP daemon (bgpd)
- B. SNMP daemon (snmpd)
- C. Routing protocol daemon (rpd)
- D. OSPF daemon (ospfd)
Answer: B,C
NEW QUESTION # 55
Which statement describes the ulst next-hop type that appears in the output of the show route forwarding-table command?
- A. A list of unicast or multicast destination prefixes for which packets will be silently discarded.
- B. A list of unicast destination prefixes for which packets will be silently discarded
- C. A list of unicast next hops used for a given destination for which load balancing is enabled
- D. A list of unicast or multicast forwarding entries waiting to be resolved.
Answer: C
NEW QUESTION # 56
Which of the following is a component of the Packet Forwarding Engine?
- A. the routing protocol process (daemon)
- B. a forwarding table
- C. the Junos software
- D. the configuration
Answer: B
NEW QUESTION # 57
Which command correctly configures a static route?
- A. set static route 0.0.0.0/0 next-hop 192.168.1.1
- B. set protocols static route 0.0.0.0/0 next-hop 192.168.1.1 7c
- C. set forwarding-options static route 0.0.0.0/0 next-hop 192.168.1.1
- D. set routing-options static route 0.0.0.0/0 next-hop 192.168.1.1
Answer: D
NEW QUESTION # 58
Referring to the exhibit, you want to block HTTP access to Web-Server from the subnet where Mal-User is located. All other traffic should be permitted.
Which firewall filter configuration do you use?
- A. [edit firewall family inet filter STOP-MAL-USER] user@router# show term one { from { source-address { 100.100.100.0/24; } destination-address { 200.200.200.1/32; } protocoltcp; destination-port http; } then reject; } term two { then { accept; } }
- B. [edit firewall family inet filter STOP-MAL-USER] user@router# show term one { from { source-address { 200.200.200.0/24; } destination-address { 100.100.100.10/32; } protocoltcp; destination-port http; } then accept; } term two { then { reject; } }
- C. [edit firewall family inet filter STOP-MAL-USER] user@router# show term one { from { source-address { 100.100.100.0/24; } destination-address { 200.200.200.1/32; } protocoltcp; destination-port http; } then accept; } term two { then { reject; } }
- D. [edit firewall family inet filter STOP-MAL-USER] user@router# show term one { from { source-address { 200.200.200.0/24; } destination-address { 100.100.100.10/32; } protocoltcp; destination-port http; } then reject; } term two { then { accept; } }
Answer: D
NEW QUESTION # 59
Which of these commands can be used to create a default route towards the upstream ISP at IP address 192.168.1.1?
- A. user@router# set routing-options static route 0.0.0.0/0 next-hop 192.168.1.1
- B. user@router# set forwarding-options static route 0.0.0.0/0 next-hop 192.168.1.1
- C. user@router# set protocols default route 0.0.0.0/0 next-hop 192.168.1.1
- D. user@router# set routing-options default route 0.0.0.0/0 next-hop 192.168.1.1
Answer: A
NEW QUESTION # 60
Which of these are routing tables found by default? (Choose three)
- A. inet6.0
- B. inet.0
- C. inet.6
- D. inet4.0
- E. inet.3
Answer: A,B,E
NEW QUESTION # 61
What information is provided by the show route forwarding-table command?
- A. the protocol from where the route was learned
- B. the number of routes that are active, hidden, or in a hold-down state
- C. the outgoing interface(s) associated with the destination prefixes
- D. the routing table stored on the RE
Answer: C
NEW QUESTION # 62
Exhibit:
Refer to exhibit, what will be the result?
- A. The device will boot in a Single-user mode at the shell prompt
- B. The device will boot in a multi-user mode at the shell prompt
- C. The device will boot in a Single-user mode at the operational prompt
- D. The device will boot in a multi-user mode at the configuration prompt
Answer: D
NEW QUESTION # 63
Which two are correct when configuring an IP address for a Fast Ethernet interface?
- A. set interfaces fe-0/0/0.0 family inet address 10.1.1.1/24
- B. set interfaces fe-0/0/0 address 10.1.1.1/24
- C. set interfaces fe-0/0/0 unit 0 family inet address 10.1.1.1/24
- D. set interfaces fe-0/0/0.0 address 10.1.1.1/24
Answer: A,C
NEW QUESTION # 64
Exhibit:
Given the routing entries shown in the exhibit, which next-hop IP address will be used for the destination IP address 192.168.1.159?
(Assume that only static routes are available for the destination.)
- A. 10.20.106.10
- B. 10.20.14.131
- C. 10.18.1.1
- D. 10.20.14.130
Answer: A
NEW QUESTION # 65
What will the request system configuration rescue save command accomplish?
- A. It will restore your system to factory default settings.
- B. It will prevent 2 commit from happening
- C. It will generate support information for JTAC.
- D. It will save a copy of the configuration so that you can go back to it at any time
Answer: D
NEW QUESTION # 66
Referring to the exhibit,
Which next-hop interface will be used to reach the 10.21.14.16 destination?
- A. ge-0/0/1.0
- B. ge-0/0/3.0
- C. ge-0/0/2.0
- D. ge-0/0/0.0
Answer: A
NEW QUESTION # 67
......
The JN0-104 exam is designed to test the candidate's knowledge of Junos software, including its architecture, configuration, operation, and troubleshooting. JN0-104 exam is made up of multiple-choice questions and simulations, and it covers a range of topics related to Junos software, including routing protocols, security, and network automation. JN0-104 exam is intended for network engineers and administrators who have at least six months of experience working with Junos software.
Juniper JN0-104 exam is an industry-recognized certification that validates the skills and knowledge required for entry-level network engineers. It is designed for professionals who have a basic understanding of networking fundamentals and want to specialize in Junos OS. Junos, Associate (JNCIA-Junos) certification is a prerequisite for advanced Juniper certifications and is highly valued by employers around the world.
Best Value Available! 2023 Realistic Verified Free JN0-104 Exam Questions: https://www.test4cram.com/JN0-104_real-exam-dumps.html
100% Accurate Answers! JN0-104 Actual Real Exam Questions: https://drive.google.com/open?id=1VjhNGwM2tWgonFfmKGUXpmZqV0pcf8Kh