[Dec 04, 2021] NS0-519 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
Pass NS0-519 Exam - Real Test Engine PDF with 60 Questions
NEW QUESTION 19
Click the Exhibit button.
A customer has a 4-node AFF A700 cluster that uses ONTAP 9.7. The customer's environment has the Emulex LP31004-M6 and Emulex LPe32002-M2 HBAs.
Referring to the exhibit, using the NVMe protocol, which two host operating systems would be supported? (Choose two.)
- A. Microsoft Windows Server 2012 R2
- B. SLES 12 SP3 64-bit
- C. SLES 15 64-bit
- D. RHEL 7.5 64-bit
Answer: B,C
NEW QUESTION 20
Click the Exhibit button.
Referring to the exhibit, which WWPN would you add to a zone set to provide access to a LUN hosted in ONTAP?
- A. 10:00:00:00:c9:43:f2:9e
- B. 20:00:00:00:c9:43:f2:9e
- C. 50:0a:09:81:87:09:3d:96
- D. 20:lb:00:a0:98:13:d5:d4
Answer: A
NEW QUESTION 21
You have a 4-node AFF A400 cluster serving iSCSI and FC LUNs. You are asked to tier Snapshot copy data from the SSDs to both Azure Blob storage and Amazon S3. The two sets of Snapshot copies must be managed by ONTAP software so that they are accessible for cloning and replication.
In this scenario, which NetApp technology accomplishes this task?
- A. MetroCluster
- B. Flash Pool
- C. Cloud Sync
- D. Fabric Pool
Answer: D
NEW QUESTION 22
Click the Exhibit button.
Referring to the dual-fabric cabling diagram shown in the exhibit, which scenario explains why the customer's iSCSI host experienced a SAN outage with a LUN on Node 2?
- A. iSCSI LIFs were configured on Node 1 and Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and Switch 1 went down.
- B. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included all nodes, and Node 1 and Node 2 went down.
- C. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included Node 1 and Node 2, and Node 1 went down.
- D. iSCSI LIFs were configured on Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and the cable connecting the host to Switch 1 went bad.
Answer: B
NEW QUESTION 23
You are adding a new AFF A220 FIA pair to an existing FlexPod infrastructure that is using a pair of Nexus 9332PX switches. Due to rack space constraints, the AFF A220 is to be installed in an adjoining rack, and the distance from the back of the AFF A220 to the Nexus 9332PX switches is nine meters.
In this scenario, which 10Gbe cabling solution would you use to connect the AFF A220 to the Nexus 9332PX switches?
- A. active Twinax
- B. LC/LC OM4 optical
- C. passive Twinax
- D. mini SAS
Answer: A
NEW QUESTION 24
Click the Exhibit button.
You have three Linux hosts that are FC multipath connected to an AFF All SAN Array A700. A failover test is performed by shutting down both Fabric A and N2, as shown in the exhibit.
Referring to this exhibit, what happens to the remaining paths from the Linux hosts to the ASA A700 target?
- A. Half of the paths are active-non-optimized (ANO) and the other half are active-optimized (AO).
- B. All paths go offline from the double failure of the switch and node.
- C. All paths are active-optimized (AO).
- D. All paths are active-non-optimized (ANO).
Answer: C
NEW QUESTION 25
You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the front-end protocol connections.
Which two actions satisfy the failure criteria? (Choose two.)
- A. Disable Snapshot policies.
- B. Pull an Ethernet cable from a Linux host.
- C. Pull an Ethernet cable from a storage port with a cluster LIF.
- D. Perform a storage controller failover.
Answer: B,D
NEW QUESTION 26
Click the Exhibit button.
Referring to the exhibit, how many LUNs should the server administrator see on the Windows 2016 host?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 27
You have a 2-node AFF A400 cluster serving iSCSI LUNs. Each A400 controller has two aggregates. The LUNs in all aggregates share data that is inline deduplicated. You are asked to enable encryption at rest to satisfy a new compliance requirement.
In this scenario, which at rest encryption solution preserves the current deduplication?
- A. Challenge Handshake Authentication Protocol (CFIAP)
- B. NetApp Aggregate Encryption (NAE)
- C. Internet Protocol Security (IPsec)
- D. NetApp Volume Encryption (NVE)
Answer: B
NEW QUESTION 28
What information should you document about your storage fabrics? (Choose two.)
- A. name service
- B. igroup name
- C. Inter-Switch Links (ISLs)
- D. zoning configuration
Answer: C,D
NEW QUESTION 29
A customer has decided to repurpose a NetApp FC target card from an older system. After installing the card into the newer NetApp AFF, the system kernel panics on boot.
Which tool would you use determine the problem?
- A. Hardware Universe (HWU)
- B. Interoperability Matrix Tool (IMT)
- C. OnCommand Insight (OCI)
- D. Active IQ OneCollect
Answer: A
NEW QUESTION 30
You have a 4-node cluster with an AFF A400 FIA pair and a FAS8700 FIA pair. You need to configure all aggregates so that they have an SSD performance tier and slower capacity tier. The cluster serves only FC LUNs to hosts.
Which two ONTAP features satisfy the requirement for this cluster? (Choose two.)
- A. FlexCache
- B. FabricPool
- C. SnapMirror
- D. Flash Pool
Answer: B,D
NEW QUESTION 31
An administrator is planning to rehost a SAN volume from one SVM to another SVM on a FAS8300 with all hard disk drives.
After rehosting the volume, what are two policies that must be reconfigured? (Choose two.)
- A. volume efficiency policy
- B. caching policy
- C. export policy
- D. snapshot policy
Answer: A,D
NEW QUESTION 32
Click the Exhibit button.
Referring to the exhibit, which step must be performed to make LUN lun0 available to hosts in igroup linux1?
- A. node-01 and node-02 must be removed from the list of reporting nodes.
- B. lun0 must be mapped to linux1.
- C. node-03 and node-04 must be added to the list of reporting nodes.
- D. lun0 must be brought online.
Answer: D
NEW QUESTION 33
Click the Exhibit button.
You have an existing legacy Fibre Channel SAN environment and have deployed an ONTAP AFF A800 cluster. You are planning to migrate a NetApp Foreign LUN Import using the existing SAN environment.
Referring to the exhibit, how must the UTA2 ports be configured?
- A. Configure the CNA to target mode.
- B. Configure the CNA to initiator mode.
- C. Configure the FCP to initiator mode.
- D. Configure the FCP to target mode.
Answer: C
NEW QUESTION 34
Click the Exhibit button.
Referring to the exhibit, you need to reduce the number of paths from the host to the LUNs.
Which three would reduce the number of paths? (Choose three.)
- A. Asymmetric Namespace Access (ANA)
- B. ALUA
- C. port sets
- D. switch zoning
- E. Selective LUN Map (SLM)
Answer: C,D,E
NEW QUESTION 35
You have a Windows 2016 server that you want to boot from an iSCSI LUN presented from an AFF A700.
To configure boot from SAN, where would you find the information to populate the NetApp igroup?
- A. server BIOS
- B. network switch
- C. Windows iSCSI initiator
- D. iSCSI HBA BIOS
Answer: C
NEW QUESTION 36
......
Get New NS0-519 Certification Practice Test Questions Exam Dumps: https://www.test4cram.com/NS0-519_real-exam-dumps.html