Free Associate-Cloud-Engineer braindumps download (Associate-Cloud-Engineer exam dumps Free Updated Jan 01, 2022)
Associate-Cloud-Engineer Dumps for Pass Guaranteed - Pass Associate-Cloud-Engineer Exam 2022
Below are the Problems in taking the Associate Cloud Engineer Exam
Google Certified Specialist is the most powerful certification that candidates can have on their resume. But for this, they will have to pass Associate Cloud Engineer questions. Associate Cloud Engineer is a challenging exam to pass this exam Candidates will have to work hard with the help of the right focus and preparation material passing this exam is an achievable goal. Test4Cram help candidates by providing the most relevant and updated Associate Cloud Engineer dumps. Furthermore, We also provide the Associate Cloud Engineer practice test that will be much beneficial in the preparation. Test4Cram aims to provide the best Associate Cloud Engineer dumps that are verified by the Google experts. If Candidates feel any doubt in the Associate Cloud Engineer practice test then our team is always there to help them. Associate Cloud Engineer dumps are the perfect way to prepare the Associate Cloud Engineer exam with good grades in the just first attempt. So, Candidates want instant success in the Associate Cloud Engineer exam with quality Associate Cloud Engineer training material then Test4Cram is the best option for them because our management is well trained in it and we update each question of all exams on regular basis after consulting recent updates with our Google certified professionals.
Target audience and other prerequisites
This certification is intended for the Cloud Engineers who know how to plan and configure Cloud solutions, install Cloud solution environments, implement and deploy Cloud solutions, configure security and access, ensure the successful operation of Cloud solutions.
There are no official requirements for this certificate and its qualifying test. However, before taking the certification exam, it is recommended that you possess at least six months of practical experience with Google Cloud solutions and products.
NEW QUESTION 60
You are working with a user to set up an application in a new VPC behind a firewall. The user is concerned about data egress. You want to configure the fewest open egress ports. What should you do?
- A. Set up a low-priority (65534) rule that blocks all egress and a high-priority rule (1000) that allows only the appropriate ports.
- B. Set up a high-priority (1000) rule that pairs both ingress and egress ports.
- C. Set up a high-priority (1000) rule that blocks all egress and a low-priority (65534) rule that allows only the appropriate ports.
- D. Set up a high-priority (1000) rule to allow the appropriate ports.
Answer: C
NEW QUESTION 61
You are a Google Cloud Engineer and assigned to set up a project for the team of four members.
You need to grant only general permissions for all the resources of the project. You decided to grant a primitive role to each person for different levels of access on the basis of their responsibilities in the project. What is not considered as a primitive role in the Google Cloud Platform console?
- A. Viewer
- B. Publisher
- C. Editor
- D. Owner
Answer: B
NEW QUESTION 62
You've created a Pod using the kubectl run command. Now you're attempting to remove the Pod, and it keeps being recreated. Which command might help you as you attempt to remove the pod?
- A. kubectl get pods
- B. kubectl get deployments
- C. kubectl get secrets
- D. gcloud container describe pods
Answer: B
NEW QUESTION 63
You want to run a single caching HTTP reverse proxy on GCP for a latency-sensitive website. This specific reverse proxy consumes almost no CPU. You want to have a 30-GB in-memory cache, and need an additional 2 GB of memory for the rest of the processes. You want to minimize cost. How should you run this reverse proxy?
- A. Create a Cloud Memorystore for Redis instance with 32-GB capacity.
- B. Run it on Compute Engine, choose the instance type n1-standard-1, and add an SSD persistent disk of 32 GB.
- C. Package it in a container image, and run it on Kubernetes Engine, using n1-standard-32 instances as nodes.
- D. Run it on Compute Engine, and choose a custom instance type with 6 vCPUs and 32 GB of memory.
Answer: D
NEW QUESTION 64
You want to add a new auditor to a Google Cloud Platform project. The auditor should be allowed to read, but not modify, all project items.
How should you configure the auditor's permissions?
- A. Create a custom role with view-only project permissions. Add the user's account to the custom role.
- B. Create a custom role with view-only service permissions. Add the user's account to the custom role.
- C. Select the built-in IAM service Viewer role. Add the user's account to this role.
- D. Select the built-in IAM project Viewer role. Add the user's account to this role.
Answer: D
NEW QUESTION 65
You have 32 GB of data in a single file that you need to upload to a Nearline Storage bucket. The WAN connection you are using is rated at 1 Gbps, and you are the only one on the connection.
You want to use as much of the rated 1 Gbps as possible to transfer the file rapidly. How should you upload the file?
- A. Change the storage class of the bucket from Nearline to Multi-Regional.
- B. Enable parallel composite uploads using gsutil on the file transfer.
- C. Use the GCP Console to transfer the file instead of gsutil.
- D. Decrease the TCP window size on the machine initiating the transfer.
Answer: B
NEW QUESTION 66
Your team needs to set up a new Jenkins instance as quickly as possible. What's the best way to get it up- and-running?
- A. Search the marketplace for Jenkins and install with Cloud Launcher.
- B. Create a Deployment Manager template and deploy it.
- C. Use Google's Managed Jenkins Service.
- D. Deploy the jar file to a Compute Engine instance.
Answer: A,C
NEW QUESTION 67
Your company uses Cloud Storage to store application backup files for disaster recovery purposes. You want to follow Google's recommended practices. Which storage option should you use?
- A. Multi-Regional Storage
- B. Regional Storage
- C. Nearline Storage
- D. Coldline Storage
Answer: D
Explanation:
Reference:
https://cloud.google.com/storage/docs/storage-classes#nearline
NEW QUESTION 68
You have sensitive data stored in three Cloud Storage buckets and have enabled data access logging. You want to verify activities for a particular user for these buckets, using the fewest possible steps. You need to verify the addition of metadata labels and which files have been viewed from those buckets. What should you do?
- A. Using the GCP Console, filter the Stackdriver log to view the information.
- B. Create a trace in Stackdriver to view the information.
- C. Using the GCP Console, filter the Activity log to view the information.
- D. View the bucket in the Storage section of the GCP Console.
Answer: A
Explanation:
The data access logs are not an option in activity log.
NEW QUESTION 69
You have a project using BigQuery. You want to list all BigQuery jobs for that project. You want to set this project as the default for the bq command-line tool. What should you do?
- A. Use "bq generate config-url" to generate a URL to the Google Cloud Platform Console to set the default project.
- B. Use "bq config set project" to set the default project.
- C. Use "gcloud generate config-url" to generate a URL to the Google Cloud Platform Console to set the default project.
- D. Use "gcloud config set project" to set the default project.
Answer: D
Explanation:
A is correct because you need to use gcloud to manage the config/defaults.
B is not correct because the bq command-line tool assumes the gcloud configuration settings and can't be set through BigQuery.
C is not correct because entering this command will not achieve the desired result and will generate an error.
D is not correct because entering this command will not achieve the desired result and will generate an error.
https://cloud.google.com/bigquery/docs/reference/bq-cli-reference
https://cloud.google.com/sdk/gcloud/reference/config/set
NEW QUESTION 70
You are building an application that will run in your data center. The application will use Google Cloud Platform (GCP) services like AutoML. You created a service account that has appropriate access to AutoML. You need to enable authentication to the APIs from your on-premises environment. What should you do?
- A. Use gcloud to create a key file for the service account that has appropriate permissions.
- B. Go to the IAM & admin console, grant a user account permissions similar to the service account permissions, and use this user account for authentication from your data center.
- C. Set up direct interconnect between your data center and Google Cloud Platform to enable authentication for your on-premises applications.
- D. Use service account credentials in your on-premises application.
Answer: A
Explanation:
Reference:
https://cloud.google.com/vision/automl/docs/before-you-begin
NEW QUESTION 71
You created several resources in multiple Google Cloud projects. All projects are linked to different billing accounts. To better estimate future charges, you want to have a single visual representation of all costs incurred. You want to include new cost data as soon as possible. What should you do?
- A. Fill all resources in the Pricing Calculator to get an estimate of the monthly cost.
- B. Configure Billing Data Export to BigQuery and visualize the data in Data Studio.
- C. Use the Reports view in the Cloud Billing Console to view the desired cost information.
- D. Visit the Cost Table page to get a CSV export and visualize it using Data Studio.
Answer: B
Explanation:
Reference:
https://cloud.google.com/billing/docs/how-to/visualize-data
NEW QUESTION 72
You create a Deployment with 2 replicas in a Google Kubernetes Engine cluster that has a single preemptible node pool. After a few minutes, you use kubectl to examine the status of your Pod and observe that one of them is still in Pending status:
What is the most likely cause?
- A. Too many Pods are already running in the cluster, and there are not enough resources left to schedule the pending Pod.
- B. The pending Pod was originally scheduled on a node that has been preempted between the creation of the Deployment and your verification of the Pods' status. It is currently being rescheduled on a new node.
- C. The node pool is configured with a service account that does not have permission to pull the container image used by the pending Pod.
- D. The pending Pod's resource requests are too large to fit on a single node of the cluster.
Answer: A
NEW QUESTION 73
You need to run an important query in BigQuery but expect it to return a lot of records. You want to find out how much it will cost to run the query. You are using on-demand pricing. What should you do?
- A. Use the command line to run a dry run query to estimate the number of bytes read.
Then convert that bytes estimate to dollars using the Pricing Calculator. - B. Arrange to switch to Flat-Rate pricing for this query, then move back to on-demand.
- C. Run a select count (*) to get an idea of how many records your query will look through.
Then convert that number of rows to dollars using the Pricing Calculator. - D. Use the command line to run a dry run query to estimate the number of bytes returned.
Then convert that bytes estimate to dollars using the Pricing Calculator.
Answer: A
Explanation:
https://cloud.google.com/bigquery/docs/estimate-costs
NEW QUESTION 74
You are building a pipeline to process time-series data. Which Google Cloud Platform services should you put in boxes 1,2,3, and 4?
- A. Firebase Messages, Cloud Pub/Sub, Cloud Spanner, BigQuery
- B. Cloud Pub/Sub, Cloud Dataflow, Cloud Datastore, BigQuery
- C. Cloud Pub/Sub, Cloud Dataflow, Cloud Bigtable, BigQuery
- D. Cloud Pub/Sub, Cloud Storage, BigQuery, Cloud Bigtable
Answer: C
Explanation:
Reference:
https://cloud.google.com/solutions/correlating-time-series-dataflow
NEW QUESTION 75
Which of the following command is used to create buckets in Cloud Storage?
- A. gcloud storage buckets create
- B. gsutil storage buckets create
- C. gsutil mb
- D. gcloud mb
Answer: C
NEW QUESTION 76
You have an application that receives SSL-encrypted TCP traffic on port 443. Clients for this application are located all over the world. You want to minimize latency for the clients. Which load balancing option should you use?
- A. HTTPS Load Balancer
- B. Network Load Balancer
- C. Internal TCP/UDP Load Balancer. Add a firewall rule allowing ingress traffic from 0.0.0.0/0 on the target instances.
- D. SSL Proxy Load Balancer
Answer: D
NEW QUESTION 77
You need to verify the assigned permissions in a custom IAM role. What should you do?
- A. Use the "gcloud init" command to view the information.
- B. Use the GCP Console, IAM section to view the information.
- C. Use the GCP Console, Security section to view the information.
- D. Use the GCP Console, API section to view the information.
Answer: B
Explanation:
A is correct because this is the correct console area to view permission assigned to a custom role in a particular project.
B is not correct because 'gcloud init' will not provide the information required.
C and D are not correct because these are not the correct areas to view this information
NEW QUESTION 78
Your organization uses Active Directory (AD) to manage user identities. Each user uses this identity for federated access to various on-premises systems. Your security team has adopted a policy that requires users to log into Google Cloud with their AD identity instead of their own login.
You want to follow the Google-recommended practices to implement this policy.
What should you do?
- A. Sync Identities in the Google Admin console, and then enable Oauth for single sign-on
- B. Sync Identities with Cloud Directory Sync, and then enable SAML for single sign-on
- C. Sync identities with Cloud Directory Sync, and then copy passwords to allow simplified login with the same credentials.
- D. Sync identities with 3rd party LDAP sync, and then copy passwords to allow simplified login with (he same credentials
Answer: B
NEW QUESTION 79
......
Google Associate Cloud Engineer Exam
An associated cloud engineer distributes applications, monitors operations and manages business solutions. This person can use the Google Cloud Console and the command-line interface to perform common platform-based activities to maintain one or more distributed solutions that take advantage of services managed or self-managed by Google in Google Cloud
The Google Cloud Certification Program offers Google Cloud users, customers and partners a way to demonstrate their technical skills in a specific role or technology. People are evaluated using a variety of rigorously developed standard methods to determine if they meet Google Cloud competition standards. The cost of certification exams varies. if you do not pass an exam, you can repeat it after 14 days. If you do not take it a second time, you must wait 60 days before you can take it a third time. If it fails a third time, you must wait a year before resuming it. You can try the test in several languages, but each attempt, regardless of language, counts the total number of attempts allowed and the waiting period between attempts remains valid. Payment is required each time an exam is taken. Avoiding this recovery policy by registering with a different name or any other means constitutes a violation of the terms and conditions of the exam and will result in the denial or revocation of a certification. Exams are designed to determine only if a person meets a minimum standard of approval or not. They are not meant to be diagnostic or spread people on a capacity scale. For this reason, numerical scores are not significant for the candidate and can be misunderstood. Google Cloud Certification Program recognizes that some other exam providers provide section comments on their exams. Google doesnât do it because it makes no sense and could be misleading. Google Cloud Certification tests are not designed to diagnose strengths and weaknesses. Google Cloud Certification exam sections are very broad categories of topics, and the range of specific questions that can be received for each section in a single exam session is extremely small in comparison. Based on such a small amount of data, there are no significant comments at the section level that we can provide responsibly. We follow the procedures accepted by the industry to ensure that our exams are valid and accurate. Our exam development process includes the following steps: A task analysis (JTA) is a formal study that begins with the identification of role representatives, technology experts and stakeholders. These experts are interviewed and interviewed in a seminar to obtain information about what people do in a particular job or role and what skills distinguish the skills. These skills are defined in the exam guides that we write on the web. Our question authors are subject matter experts who worked in the certified role. The question editors are trained in the exam standards and conventions that we apply to our exams. All questions are examined to determine if they meet the standards and are technically accurate. Once the questions have passed all warnings and approvals, they are published in a beta test. The purpose of the beta exam is to collect performance statistics related to the exam questions to determine which ones are the most effective. We review the statistics and comments on the questions and eliminate questions that do not meet our standards. The minimum score for each exam is reserved. It is determined by a group of internal and external experts in the field, following a process of setting standards accepted by the sector. The minimum score applies equally to all candidates. It is reevaluated when changes are made to the content of the exam. The delivery method for an exam depends on its format.
Verified Associate-Cloud-Engineer dumps Q&As - Pass Guarantee Exam Dumps Test Engine: https://www.test4cram.com/Associate-Cloud-Engineer_real-exam-dumps.html
Verified Associate-Cloud-Engineer dumps and 245 unique questions: https://drive.google.com/open?id=1XY-X5ZAuKvnLfSCnQa1KkpzLsWGpITt8