[Jan 14, 2022] VMCE2020 Exam Dumps - Veeam Practice Test Questions
New Real VMCE2020 Exam Dumps Questions
NEW QUESTION 18
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?
- A. A standard virtual switch with uplink(s)
- B. A standard virtual switch without uplink(s)
- C. A distributed virtual switch without uplink(s)
- D. A distributed virtual switch with uplink(s)
Answer: A
NEW QUESTION 19
A company needs to maintain and verify backups at a secondary site to meet the following requirements: RTO of two hours, RPO of 12 hours, four weeks retention. Which of the following backup copy job configurations meets these requirements?
- A. Periodic backup copy job, scheduled for a 12-hour interval, with 56 restore points to retain
- B. Periodic backup copy job, scheduled for a two-hour interval, with 56 restore points to retain
- C. Periodic backup copy job, scheduled for a two-hour interval, with 112 restore points to retain
- D. Periodic backup copy job, scheduled for a 12-hour interval, with 112 restore points to retain
Answer: C
NEW QUESTION 20
A virtual machine in your environment has been hit by a virus. You need to restore the virtual machine as fast as possible. At the same time, you need to make sure that any dormant virus on the backed up virtual machine is detected. What restore method should you use when recovering to a new location?
- A. Virtual disk restore
- B. Instant VM Recovery with "secure restore"
- C. Instant VM Recovery with "staged restore"
- D. SureBackup
Answer: B
NEW QUESTION 21
A backup job has been configured to keep three incremental restore points and a synthetic full backup each Sunday. More restore points are present on disk than what was configured in the job. Why?
- A. The old restore points will be deleted after the new restore chain meets the retention policy
- B. Per VM backup files are enabled in the repository
- C. You should configure the synthetic full backup to be performed on Mondays instead
- D. The other restore points are weekly full backups, this is expected
Answer: A
NEW QUESTION 22
In the event a VMware VM configuration file (VMX) is missing and a restore is needed, what Veeam restore process is the best choice for this situation?
- A. Virtual disk restore
- B. Instant VM recovery
- C. VM file restore
- D. Instant disk recovery
Answer: C
NEW QUESTION 23
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?
- A. Use Instant VM Recovery
- B. Use a failover plan
- C. Use a planned failover
- D. Use on-click failover
Answer: A
NEW QUESTION 24
A company has been running off replicated, business-critical VMs at their disaster recovery location since an earthquake near the primary data center occurred. Since the threat has passed, they want to stop the replicas and switch to the VMs at the primary data center without losing data. Which of the following actions is the first step they should take?
- A. Failback to production
- B. Undo failover
- C. Permanent failover
- D. Planned failover
- E. Commit failback
- F. Failover
Answer: A
NEW QUESTION 25
Which Veeam Backup & Replication job type offers the shortest recovery time objective (RTO)?
- A. File to tape
- B. Backup to tape
- C. Replication
- D. Backup copy
Answer: C
NEW QUESTION 26
Which of the following predefined tests can be performed during a SureBackup verification test on a backup file? (Choose three.)
- A. Heartbeat test
- B. OS test
- C. Application test
- D. Boot time
- E. SAN check
- F. Ping test
Answer: A,C,F
NEW QUESTION 27
A backup administrator is creating a SureBackup environment up using Hyper-V as the hypervisor. Which virtual labs are available for Hyper-V? (Choose two.)
- A. Advanced single-host (manual configuration)
- B. Basic single-host (automatic configuration)
- C. Advanced single-host (automatic configuration)
- D. Advanced multi-host (manual configuration)
- E. Advanced multi-host (automatic configuration)
Answer: B,E
NEW QUESTION 28
Which of the following is a backup mode that can be configured within a Veeam Agent for Windows backup job?
- A. Reverse incremental with optional periodic synthetic full backups
- B. Forward incremental with optional periodic synthetic and/or active full backups
- C. Forward incremental and reverse incremental, both with optional periodic synthetic and/or active full backups
- D. Reverse incremental with periodic active full backups
Answer: B
NEW QUESTION 29
A company needs to maintain and verify backups at a secondary site to meet the following requirements:
RTO of two hours, RPO of 12 hours, four weeks retention. Which of the following backup copy job configurations meets these requirements?
- A. Periodic backup copy job, scheduled for a two-hour interval, with 112 restore points to retain
- B. Periodic backup copy job, scheduled for a two-hour interval, with 56 restore points to retain
- C. Periodic backup copy job, scheduled for a 12-hour interval, with 56 restore points to retain
- D. Periodic backup copy job, scheduled for a 12-hour interval, with 112 restore points to retain
Answer: B
NEW QUESTION 30
A Veeam backup administrator, protecting all VMs in a VMware environment with backups and replicas, has been requested to run a multi-server application in an On-Demand Sandbox. The sandbox needs to stay powered on, uninterrupted, for 30 days while daily backups and replicas continue to run. How can this be done?
- A. Create an application group and leverage regular backup restore points as the source for the application group
- B. Create a (secondary) replication job for the required VMs that are not scheduled to run; make an application group and use these replicas as the source
- C. Create an application group and leverage regular replica restore points as the source for the application group
- D. Create a (secondary) replication job for the required VMs that are not scheduled to run; create a SureBackup job and use these replicas as the source
Answer: D
NEW QUESTION 31
To suppress Veeam ONE alarms under specific conditions or when a specific event occurs, which of these options can be selected? (Choose three.)
- A. Storage snapshot deletion
- B. Storage snapshot creation
- C. Snapshot creation
- D. Veeam backup activity
- E. Snapshot deletion
- F. High CPU usage
Answer: C,D,E
NEW QUESTION 32
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?
- A. Use a failover plan
- B. Use Instant VM Recovery
- C. Use a planned failover
- D. Use on-click failover
Answer: C
NEW QUESTION 33
Select the correct description of a synthetic full backup.
- A. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
- B. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
- C. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file
- D. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file
Answer: A
NEW QUESTION 34
A customer has a physical proxy configured for Direct Storage Access without failover to network mode. The backup fails. What could be the issue?
- A. Write access has not been enabled on the SAN
- B. The storage is not added into the storage infrastructure, inside the backup and replication console
- C. The datastores are properly zoned and exposed to the proxy server but in read-only mode
- D. The disks being processed are IDE and/or SATA
- E. One or more of the VM disk(s) are on Wols
Answer: E
NEW QUESTION 35
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m. and the administrator fails over the replica at 8 a.m. When the power comes back on, the administrator performs the "failback" action at 2 p.m.
and checks the state of the original VM. They recognize that not all data is available. What is missing?
- A. Data from 1 a.m. to 7 a.m.
- B. Data from 7 a.m. to 8 a.m.
- C. Data from 1 a.m. to 2 p.m.
- D. Data from 8 a.m. to 2 p.m.
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 36
A backup administrator is planning to install Veeam ONE. Which data collection mode collects the most data per VM?
- A. For backup data only
- B. Optimized for typical deployment
- C. Optimized for advanced scalability deployment
- D. For vCenter data only
Answer: B
NEW QUESTION 37
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?
- A. Raw data every 20 seconds
- B. Aggregated data every two hours
- C. Aggregated data every five minutes
- D. Data does not exist
Answer: C
Explanation:
Explanation
https://helpcenter.veeam.com/docs/one/deployment/data_collection_modes.html?ver=100
NEW QUESTION 38
A virtual machine in your environment has been hit by a virus. You need to restore the virtual machine as fast as possible. At the same time, you need to make sure that any dormant virus on the backed up virtual machine is detected. What restore method should you use when recovering to a new location?
- A. Virtual disk restore
- B. Instant VM Recovery with "secure restore"
- C. Instant VM Recovery with "staged restore"
- D. SureBackup
Answer: B
Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/em/em_disk_restore.html?ver=100
NEW QUESTION 39
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?
- A. A standard virtual switch with uplink(s)
- B. A standard virtual switch without uplink(s)
- C. A distributed virtual switch without uplink(s)
- D. A distributed virtual switch with uplink(s)
Answer: A
Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/vsphere/surebackup_advanced_vlab.html?ver=100
NEW QUESTION 40
Which of the following is a backup mode that can be configured within a Veeam Agent for Windows backup job?
- A. Forward incremental with optional periodic synthetic and/or active full backups
- B. Forward incremental and reverse incremental, both with optional periodic synthetic and/or active full backups
- C. Reverse incremental with optional periodic synthetic full backups
- D. Reverse incremental with periodic active full backups
Answer: C
NEW QUESTION 41
Select the correct description of a synthetic full backup.
- A. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
- B. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
- C. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file
- D. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file
Answer: A
Explanation:
Explanation/Reference: https://helpcenter.veeam.com/docs/backup/hyperv/synthetic_full_backup.html?ver=100
NEW QUESTION 42
......
Difficulty in Writing Veeam VMCE2020: Veeam Certified Engineer 2020 Exam
As everybody knows, this examination can not be quickly completed because the Veeam VMCE2020 dumps requires you to pass the examinations. These dumps require a lot of time and accurate and up to date content to pass the exam effectively. Many applicants are doubted about the type of questions posed in the exam and the complexity of questions and the time taken to complete the questions before writing a credential Veeam certificate. Veeam Accredited Developer Candidates are evaluating their education and finding places for change in the real review style. The best approach is to practice the Professional Credential Review with a Veeam Certified Developer, as the examination is a key factor of the Veeam Certified Developer.
This Web Simulator is for SysOps Candidates who deliver, provision, maintain, or support advanced Veeam Cloud Solution in their customers' organizations. Candidates for this exam typically include system administrators. The best way to pass the Professional Test is to question and prepare with Veeam VMCE2020 exam dumps. The examination is intended for individuals who perform an Administration role. The Web Simulator validates an examinee’s ability to effectively demonstrate knowledge of how to administer and monitor secure and robust applications on Veeam technologies. The Web Simulator will also help candidates to understand better how to use Veeam features and functionality using Veeam Monitor and Metric tools to interact with Veeam services from any application.
Partner Professional exam Research Plan that helps applicants to explore their strengths and faults to develop their time management skills and to get an understanding of the score they should receive. Veeam Accredited Developer Professional review is the new issue to the review, that applicants without difficulties should understand. Professional Veeam VMCE2020 exam tests research material from Veeam Accredited Developer is ideally suited to busy practitioners who have no money to spare on training and want to do so within one week. Following a thorough review of Veeam VMCE2020: Veeam Certified Engineer 2020 practice evaluation has been properly prepared by the expert team. We periodically update our content. The aim is to keep candidates up-to-date and we shall automatically amend the material when and when the Offensive Protection reports any changes in the Veeam VMCE2020 dumps.
Topics of Veeam VMCE2020: Veeam Certified Engineer 2020 Exam
Candidates must know the exam topics before they start preparation. Because it will help them to hit the core. * * Veeam VMCE2020 exam tests * * will include the following topics:
Building backup capabilities
Understand the concepts behind backup copy jobs
Understand backup use-cases
Understand the backup optimizations that can be applied and their impact
Differentiate between and select the most appropriate backup method
Apply appropriate global settings for your environment
Building replication capabilities
Understand replication use-cases
Correctly use the configuration options available within replication
Testing backup and replication
Determine and configure an application group
Determine which data lab to use and configure
Combine data labs and application groups into SureBackup jobs
Set up a sandbox environment
Monitoring and reporting
Understand the infrastructure of Veeam ONE
Set up reports and dashboards
Configure Veeam ONE
Who Is the Best Candidate for the Veeam VMCE2020 Exam?
The most appropriate group of candidates for VMCE2020 includes specialists with responsibilities regarding data protection. Also, these are individuals who know how to utilize the Availability Suite for Veeam right. In most cases, these people serve in the roles such as engineers and administrators.
Pass Your VMCE2020 Exam Easily with Accurate PDF Questions: https://www.test4cram.com/VMCE2020_real-exam-dumps.html