[Jan 23, 2022] Valid 700-905 Test Answers & 700-905 Exam PDF
Valid Systems Engineer 700-905 Dumps Ensure Your Passing
Cisco 700-905 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 18
Which two features enable RAID cards striping as well as mirroring and parity1? (Choose two.)
- A. No load on the system resources, drives seem as one drive to the operating system
- B. Integration with Cisco Intersight for a cloud-based storage management solution.
- C. Hot replacement of drives available, depending on configuration
- D. Distributed drives across disparate systems can be in RAID together.
- E. On RAID card failure, the RAID onboard concurrent cache assists rebuild cache.
Answer: D,E
NEW QUESTION 19
Which statement about Standalone Cisco UCS Server Deployments is valid?
- A. They require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
- B. They require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
- C. They do not require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
- D. They do not require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
Answer: D
Explanation:
NEW QUESTION 20
With which three components must every HyperFlex cluster be equipped with in regard to disks?
(Choose three.)
- A. NVMe drives
- B. there are no specific requirements
- C. same number of capacity drives
- D. SAS drives
- E. same type of cache drives
- F. same type and size of capacity of drives
Answer: C,E,F
Explanation:
NEW QUESTION 21
Which three capabilities are provided by Virtual Interface Cards'? (Choose three.)
- A. Virtualizing object storage environments by pushing meta data directly to the management server
- B. Multiple-interface-card virtualization without any additional driver requirements with integration of the virtualized cards into the Fabric Interconnect infrastructure.
- C. The virtual interfaces created by a VIC do not accommodate hypervisor communication like VMkernel interfaces on vSphere.
- D. Management through Cisco IMC or UCS Manager with dynamic configuration of virtual interface cards based on the server profile (MAC/WWN).
- E. A virtual environment, such as VMware vSphere, provides VM connectivity via a virtual switch to individual virtual machines bypassing local hardware requests.
- F. Traffic processing for internal and external communication supporting simultaneous HBA and NIC operation on the same physical hardware.
Answer: B,D,F
Explanation:
NEW QUESTION 22
There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are
three disadvantages of using validated yet mixed hardware? (Choose three.)
- A. "Software only" solutions are inherently more secure, adhering to government regulations.
- B. Validated yet "mixed" hardware systems may be supported by the
specific original equipment manufacturers but software vendors require a master level services
agreement. - C. "Hardware only" solutions require less latency for data aggregation.
- D. "Software only" HCI solutions often mean that HCI vendors do not have control over the hardware that
the consumer is using. The lack of control over the hardware can result in hardware not being
security-compliant (usually the case with white box solutions) or not being optimally configured for the
given HCI solution. - E. Validated hardware does not mean smooth performance, which particularly applies to hardware that is
seldom chosen for the hardware part of the "software only" solution. - F. "Software only" solutions can result in a lack of simplicity for installation and maintenance. While setup
and maintenance of an HCI solution might be simple you still need to configure and maintain the
hardware part, which is not orchestrated by the HCI solution.
Answer: B,C,E
NEW QUESTION 23
How much memory is reserved for the controller VM in the HX220c?
- A. 24 GB
- B. 12 GB
- C. 78 GB
- D. 48 GB
Answer: D
Explanation:
NEW QUESTION 24
Which version of HXDP was the first to support multiple VICs on a single server?
- A. HXDP 4.0
- B. HXDP 3.5.1
- C. HXDP 3.0
- D. HXDP 3.5
Answer: C
NEW QUESTION 25
Drag the server type from the left onto the maximum number of capacity drives on the right.
Which three capabilities are provided by Virtual Interface Cards'? (Choose three.)
- A. Virtualizing object storage environments by pushing meta data directly to the management server
- B. Management through Cisco IMC or UCS Manager with dynamic configuration of virtual interface cards
based on the server profile (MAC/WWN). - C. Multiple-interface-card virtualization without any additional driver requirements with integration of the
virtualized cards into the Fabric Interconnect infrastructure. - D. Traffic processing for internal and external communication supporting simultaneous HBA and NIC
operation on the same physical hardware. - E. A virtual environment, such as VMware vSphere, provides VM connectivity via a virtual switch to
individual virtual machines bypassing local hardware requests. - F. The virtual interfaces created by a VIC do not accommodate hypervisor communication like VMkernel
interfaces on vSphere.
Answer: B,C,E
NEW QUESTION 26
The process of optimizing information is tightly tied to the writing process as it is performed inline as the writing process is being performed The process of data optimization is performed with which two processes? (Choose two)
- A. On write, the local lOVisor sends the write to the primary CVM for that block
- B. The primary CVM compresses the data, writes it to its cache drive and mirrors it
- C. On read/Write. the distributed VAAI sends the write to the primary CVM for that block
- D. ACK is sent to the CVM that the write is about to be initiated
- E. The secondary CVM compresses the data, reads it from its cache drive and mirrors it
Answer: A,B
Explanation:
NEW QUESTION 27
Which two Cisco UCS Servers support converged nodes in HyperFlex Data Platform (HXDP)?
(Choose two.)
- A. UCS C480
- B. UCS B480
- C. HX240
- D. HX 220
- E. UCSB200
Answer: C,D
Explanation:
NEW QUESTION 28
What is the minimum amount of memory required for an HX node?
- A. 192 GB
- B. 32 GB
- C. 64 GB
- D. 128 GB
Answer: D
Explanation:
NEW QUESTION 29
Which uses for the system drive in an HX node are valid? (Choose two.)
- A. Garbage collection
- B. Virtual machine store
- C. Migration
- D. Saving and restoring program state
- E. Write Cache
Answer: A,D
NEW QUESTION 30
Which uses for the system drive in an HX node are valid? (Choose two.)
- A. Garbage collection
- B. Virtual machine store
- C. Migration
- D. Saving and restoring program state
- E. Write Cache
Answer: A,D
Explanation:
NEW QUESTION 31
How many PCIe standards-compliant interfaces do Cisco VICs support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 32
Which two statements on Replication Factors are valid? (Choose two.)
- A. LAZ can increase RTO for 16+ node clusters.
- B. LAZ can decrease fault tolerance of S+ node clusters to less than 4
- C. When performing rolling upgrades, the upgraded node is down for maintenance, stretching RF2 to the
absolute limit. - D. RF2 has 100% better protection of data while using 33% more space and is recommended.
- E. RF3 has 100% better protection of data while using 33% more space and is recommended.
Answer: C,E
NEW QUESTION 33
Which two results are expected when you replace a node or expand a cluster? (Choose two.)
- A. The cluster profile is updated and RAID takes care of rebalancing the load.
- B. vSphere DRS migrates the virtual machines to the new node to balance the load
- C. Affected node is marked as unhealthy and placed into standby mode
- D. On node replace, the self-healing must finish for the cluster to be healthy
- E. Distributed pooled data is migrated off nodes to master data store.
Answer: D,E
NEW QUESTION 34
How can the maximum 10 performance be achieved?
- A. Use the HX 240 with all flash drives
- B. Use the HX 220 with all flash drives
- C. Use the HX 220 with all SAS drives
- D. Use the HX 240 with all SAS drives
Answer: A
NEW QUESTION 35
What is required to cluster a pair of Fabric Interconnects?
- A. HXDP 3.5.2 or better
- B. uplink connections to the enterprise network
- C. UCS Manager 2.1 or better
- D. connection between the Fl pair using ports L1 and L2
Answer: D
Explanation:
NEW QUESTION 36
HyperFlex compute nodes contribute what percentage of the overall disk storage capacity?
- A. 0%
- B. 10%
- C. 20%
- D. 5%
Answer: B
NEW QUESTION 37
Which three configurations for read caching in Cisco HyperFlex are valid? (Choose three.)
- A. Level 4 cached (SSD): With semi-flash nodes; there is a large difference in read speeds between SSDs
- B. Write-through (install option for VDI): Only most commonly used data is cached: optimizing VDI
performance - C. Battery-Initiated Read-back (default): Only read data and most commonly used data are deposited in the
Level 4 read-back cache - D. Write-first (default for VDI): Infrequently used data is cached: freeing system resources for VDI
performance - E. Write-back (default): Only write information and most commonly used information are deposited in the
cache - F. No caching (SSD): With all-flash nodes; because there is little difference in read speeds between SSDs
Answer: A,C,F
NEW QUESTION 38
......
700-905 Dumps Real Exam Questions Test Engine Dumps Training: https://www.test4cram.com/700-905_real-exam-dumps.html