[May-2023] BICSI INSTC_V7 Exam: Basic Questions With Answers
New 2023 Realistic Free BICSI INSTC_V7 Exam Dump Questions and Answer
The INSTC_V7 exam covers a wide range of topics related to copper cabling installation, including safety procedures, cable preparation, termination, testing, troubleshooting, and documentation. Passing this exam demonstrates a thorough understanding of these topics and validates the knowledge and skills required to perform copper cabling installation tasks in a safe and efficient manner. With this certification, professionals can distinguish themselves in the industry and increase their job opportunities and earning potential.
BICSI Installer 2 - Copper or INSTC_V7 Certification Exam is a professional certification designed for individuals who are interested in becoming experts in copper cabling installation. This certification focuses on copper cabling installation and maintenance, giving candidates the necessary knowledge and skills to install, terminate, and test copper cabling systems according to industry standards.
The BICSI INSTC_V7 (BICSI Installer 2 - Copper) Exam is a certification exam designed for professionals who are looking to enhance their skills and knowledge in copper cabling installation. This exam is offered by BICSI, which stands for Building Industry Consulting Service International, a non-profit organization that provides information, education, and knowledge assessment for individuals and companies in the information and communications technology industry.
NEW QUESTION # 59
Which of the following terms is used to describe mechanical firestop systems?
- A. Elastomeric
- B. Ablative
- C. Intumescent
- D. Endothermic
Answer: A
NEW QUESTION # 60
How long does it take someone to form a first impression?
- A. 10 to 15 seconds
- B. 1 to 2 minutes
- C. 5 to 10 minutes
- D. 30 minutes to 1 hour
Answer: A
NEW QUESTION # 61
What is the maximum allowable horizontal cable length?
- A. 30 m (100')
- B. 50 m (164')
- C. 10 m (33 ')
- D. 90 m (295')
Answer: D
NEW QUESTION # 62
Which type of tester includes a set of modular plugs?
- A. Tone generator
- B. Cable-end locator kit
- C. Multimeter
- D. Inductive amplifier
Answer: B
NEW QUESTION # 63
Two truck drivers are communicating over a Citizens Band (CB) radio. Only one driver can send a message at a time with this system.
What type of transmission method is used in this example?
- A. Half-duplex
- B. Simplex
- C. Full duplex
Answer: A
NEW QUESTION # 64
Which of the following make the biggest impression on a customer during face-to-face conversation?
- A. Tone of voice
- B. Choice of words
- C. Body language
Answer: C
NEW QUESTION # 65
What is the maximum pull force for four-strand optical fiber?
- A. 880 N (200 lbf)
- B. 222N (50 lbf)
- C. 330 N (75lbf)
Answer: B
NEW QUESTION # 66
Which of the following is used to connect cabinets to the nearest SBB?
- A. RBB
- B. BBC
- C. TBB
- D. TEBC
Answer: D
NEW QUESTION # 67
Which of the following connector styles is presently used within optical fiber cabling systems (i.e., it is NOT a legacy connector)?
- A. Small form factor (SFF)
- B. SMA 906
- C. Biconic
- D. Mechanical transfer RJ
Answer: A
NEW QUESTION # 68
The information transmitted by an ICT system can originate in two fundamental forms:
- A. Analog and digital
- B. Progressive and regressive
- C. Light and sound
- D. Synchronous and asynchronous
Answer: A
NEW QUESTION # 69
What is the minimum inside bend radius for balanced twisted pair (multi-pair) cable?
- A. 6 times the outside cable diameter
- B. 50 mm (2")
- C. 10 times the outside cable diameter
- D. 25 mm (1")
Answer: C
NEW QUESTION # 70
How far should the top of a ladder extend above the roofline?
- A. 0.9 m (3')
- B. 0.3 m (1')
- C. 0.5 m (1.6')
- D. 0.6 m (2')
Answer: A
NEW QUESTION # 71
Which of the following PPE items MUST be worn at all times when you are working with or handling OF?
- A. Eye Protection
- B. Fall Protection
- C. Breathing Protection
- D. Hearing Protection
Answer: A
NEW QUESTION # 72
Which of the following is designed to provide protection from harmful chemicals?
- A. Leather gloves
- B. Rubber gloves
- C. Cut-resistant gloves
Answer: B
NEW QUESTION # 73
A category 8 cable is terminated into category 6A outlets with category 5e patch cords. What is the maximum supported performance level?
- A. Category 7
- B. Category 6A
- C. Category 8
- D. Category 5e
Answer: D
NEW QUESTION # 74
How many cycles are in 10Hz?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 75
Which of the following quantifies the bandwidth of a cabling system in a frequency range of interest?
- A. Kilowatt hours
- B. Megabits
- C. Volt-amperes
- D. Megahertz
Answer: D
NEW QUESTION # 76
How much sheath of the cable needs to be removed in order to properly terminate an 8P8C?
- A. 6.3mm (0.25")
- B. 25mm (1")
- C. 12.7mm (0.5")
- D. 38 mm (1.5")
Answer: C
NEW QUESTION # 77
What is the recommended minimum amount of aisle space between and around equipment?
- A. 1.2 m (4')
- B. 1 m (3.3')
- C. 1.52 m (5')
- D. 0.6 m (2')
Answer: B
NEW QUESTION # 78
Which of the following is the bonding connection point for telecommunications systems and equipment in the area by a telecommunication space?
- A. RBB
- B. BBC
- C. SBB
- D. TEBC
Answer: C
NEW QUESTION # 79
A radio station transmits an omnidirectional signal that is received by multiple radios. What type of transmission method is used in this example?
- A. Simplex
- B. Half-duplex
- C. Full-duplex
Answer: A
NEW QUESTION # 80
Cavity boxes should be at least _____ away from the wall, where possible.
- A. 100mm (4")
- B. 450mm (18")
- C. 300mm (12")
- D. 150mm (6")
Answer: A
NEW QUESTION # 81
......
Guaranteed Success in BICSI Certification INSTC_V7 Exam Dumps: https://www.test4cram.com/INSTC_V7_real-exam-dumps.html
INSTC_V7 Practice Test Engine: Try These 115 Exam Questions: https://drive.google.com/open?id=1ztR3q0VwnrHUQeFtojKzlDZYkR8EvgbN