Nov 22, 2024 Newest ACP-01101 Exam Dumps – Achieve Success in Actual ACP-01101 Exam
Updated Autodesk ACP-01101 Dumps – Check Free ACP-01101 Exam Dumps (2024)
NEW QUESTION # 49
Exhibit.
The building label shown is a single piece of annotative text with two annotative scales assigned to it (1: 50 and 1100) The current drawing scale is set to 1:50.
The 1:100 scale label must be moved outside the building and the 1:50 scale label must remain inside the building, as shown on the right in the exhibit How should the label location be modified?
- A. Leave the drawing scale set to 1 50 and then use the MOVE command
- B. Set the drawing scale to 1 100 and then use the MOVE command
- C. Leave the drawing scale set to 1 50 and then grip edit the text label
- D. Set the drawing scale to 1 100 and then grip edit the text label
Answer: B
Explanation:
* Set the Drawing Scale:
* Change the current drawing scale to 1:100 by selecting it from the scale list in the status bar or by using the SCALE command.
* Use the MOVE Command:
* With the drawing scale set to 1:100, select the annotative text label.
* Type MOVE in the command line and press Enter.
* Click on the text label and move it to the desired location outside the building.
* Verify the Positioning:
* Switch back to the 1:50 scale to ensure that the label at 1:50 scale remains in its original position inside the building.
* Verify that the 1:100 scale label is positioned outside the building.
This approach ensures that each annotative scale label is positioned correctly relative to the different scales.
References:
* AutoCAD Documentation on annotative text: Annotative Text
Thank you for your engagement! Join our VIP AI Discord community at SmartPrompt for AI news and custom prompts for passive income opportunities with business automation.
NEW QUESTION # 50
You have three multileaders as shown in exhibit 1. (Refer to the exhibit 1 tab.)
You need to change the display of the multileaders to match the multileaders in exhibit. (Refer to the exhibit 2 tab.)
Which command should you use?
- A. Remove Leader
- B. Add Leader
- C. Align Leader
- D. Collect Leader
Answer: D
Explanation:
The command that you should use is B. Collect Leader1. The collect leader option groups multiple leaders into one multileader object with a common landing line1. This option is useful when you want to create a single label or callout for multiple objects2.
To use this option, you need to select the MLEADER command and then select Collect Leader from the Options menu. Then you can select two or more existing multileaders that have similar properties and press Enter. The selected multileaders will be collected into one multileader object with a common landing line1.
NEW QUESTION # 51
Refer to the exhibit.
You are working on a drawing. You copy a set of entities and exit the COPY command. You then use the MOVE command on the same set of entities.
Which default option should you use when prompted to select entities?
- A. A (All)
- B. Spacebar
- C. L (Last)
- D. P (Previous)
Answer: D
Explanation:
Explanation
when you use the MOVE command on a set of entities that you have previously copied, you should use B. P (Previous) as the default option when prompted to select entities. This will select the last set of entities that you modified with any command.
https://forums.autodesk.com/t5/autocad-forum/move-previous-command/td-p/3466896
https://www.cadlinecommunity.co.uk/hc/en-us/articles/360002360178-Move-Copy-Rotate-All-in-one-editing-co
NEW QUESTION # 52
Exhibit.
A CAD designer is working on a proposed building addition. The building is oriented on the site at an angle as shown in the exhibit (left).
Without rotating any geometry how should the CAD designer orient the drawing so that it is orthogonal to the screen as shown in trio exhibit on too right?
- A. Type PLAN and use me Current UCS option
- B. Type PLAN and set the UCS to World
- C. Type UCS and set lo Previous
- D. Type UC5 and set the UCS to View
Answer: A
Explanation:
* Identify the Current UCS:
* Before changing the view, ensure that the UCS (User Coordinate System) is correctly oriented with the angled geometry.
* If necessary, use the UCS command to align the UCS with the angled building addition.
* Use the PLAN Command:
* Type PLAN in the command line and press Enter.
* When prompted, choose the Current UCS option. This option adjusts the view so that it becomes orthogonal (aligned) to the current UCS.
* Result:
* The drawing will now be oriented orthogonally on the screen, as shown in the exhibit on the right, without rotating any actual geometry.
References:
* AutoCAD Documentation on the PLAN command: PLAN Command
NEW QUESTION # 53
A CAD designer needs to create an associative array along a curved path The object being arrayed must remain in its current orientation.
While creating the Path Array, how should the designer ensure the orientation of the object?
- A. Redefine the Base Point.
- B. Define a Tangent Direction
- C. Turn off Z Direction.
- D. Turn off Align items.
Answer: D
Explanation:
When creating a path array in AutoCAD, the objects being arrayed typically align with the direction of the path by default. To maintain the original orientation of the objects while following the curved path, you should turn off the "Align items" option.
* Select the Object: Choose the object you want to array along the path.
* Path Array Command: Use the ARRAYPATH command or go to the Array command and choose Path Array.
* Select Path: Select the path (curved line or arc) along which the objects will be arrayed.
* Turn Off Align Items: In the Array options, turn off the "Align items" checkbox to ensure that the objects maintain their original orientation.
This will keep the orientation of each object the same as the original, regardless of the curvature of the path.
NEW QUESTION # 54
Refer to exhibit.
The annotation scale of a viewport has been changed from 1" = 20' to 1" = 40', but *he 1" = 20' text does not match the revised viewport scale.
A CAO designer is asked to modify the scale text in the north arrow block so that it always matches the associated viewport scale alter the RCGLN command is executed.
How should the 1" = 20' text do modified so the scale automatically updates?
(The image is presented in Imperial units 1 in = 25 mm [Metric units rounded])
- A. explode the block using DURST.
- B. Make the text a block attribute
- C. Include the text in a visibility state
- D. Replace the text wan a field
Answer: D
Explanation:
Open the Block Editor: Select the north arrow block and enter the Block Editor by typing BEDIT in the command line and pressing Enter.
Replace Text with Field: Select the text object (1" = 20') and delete it. Then, use the MTEXT command to create a new text object.
Insert Field: In the Mtext Editor, right-click and choose Insert Field. In the Field dialog box, select Object as the Field Category, and choose Viewport as the Field Names.
Select the Viewport Scale: Choose the Standard Scale property and click OK. This will create a dynamic text that updates based on the viewport scale.
Save and Close: Save the block changes and exit the Block Editor.
References:
* AutoCAD Help Documentation on Using Fields in AutoCAD
NEW QUESTION # 55
Refer to exhibit.
(Note Exhibit shown is the AutoCAD interface in Windows which the AutoCAD tor Mac version diners in appearance, the correct answers correlate in the options.] Tim four tree list sheets need to be plotted to PDF al half stale (12x18).
The sheet drawings shown have a page setup named 12x10 PDF predefined Willi those settings.
What should the CAD designer do 10 plot the requested sheets?
- A. Select the four sheets shown, change the Precision, and then click Publish
- B. Modify the settings in the Sheet Set PDF Publish Options and then click Publish.
- C. Set the PDI~ Preset option to AutoCAD PDI" (Half Scale) and then click Publish
- D. Set the Page Setup tor the tour sheets to 12x18 PDf and then click Publish
Answer: D
Explanation:
Open the Sheet Set Manager: Type SHEETSET in the command line and press Enter.
Modify Page Setup: Right-click on the sheet set or individual sheets and select Properties.
Set Page Setup: Change the page setup to 12x18 PDF.
Publish: Click Publish to generate the PDF with the desired settings.
References:
* AutoCAD Help Documentation on Publishing Drawing Sheets
NEW QUESTION # 56
Exhibit.
ACAD designer is modifying the closed polyline using grips.
The top right segment (A) was originally an arc. but is now a chamfered comer.
Which one editing combination did the designer use to make this change? (Note; Mac commands shown in parentheses.
- A. Hover over the midpoint grip and choose Add Vertex
- B. Hover over the midpoint grip and choose Convert to Line
- C. Select the midpoint grip, right click (Control click), and choose Base Point
- D. Select the midpoint grip, right-click (Control-click), and choose Move
Answer: B
NEW QUESTION # 57
You have a drawing that contains three of the same objects.
Which object has layer transparency set to 90? Click the correct object in the answer area.
Answer:
Explanation:
Explanation
According to the AutoCAD for Design and Drafting documents, layer transparency is a property that makes objects on a layer appear translucent or opaque. The higher the transparency value, the more transparent the layer appears. Therefore, the object that has layer transparency set to 90 is the one that appears the most faded or dimmed in the drawing. In this case, it is the object on the right. You can click on it to select your answer.
NEW QUESTION # 58
Which two objects support associative dimensions? (Select 2)
- A. Arcs
- B. Images
- C. Hatches
- D. Polylines
Answer: A,D
Explanation:
associative dimensions adjust to changes in the geometric objects they measure. Dimension associativity defines the relationship between geometric objects and the dimensions that give their distance and angles.
Based on 2 and 3, dimensions in a layout may be associated to objects in model space when the DIMASSOC system variable is set to 2.
NEW QUESTION # 59
Refer to exhibit.
The sheet layout shown includes tables arid notes on the tight side of the page.
Which option of the MVIEW command will create a viewport in the shape of the blue-hatched area?
- A. NAmed
- B. Shadeplot
- C. Fit
- D. Polygonal
Answer: D
Explanation:
To create a viewport in AutoCAD that matches the blue-hatched area shown in the exhibit, you need to use the
"Polygonal" option in the MVIEW command. The "Polygonal" option allows you to create viewports with non-rectangular shapes, which can be customized to fit any area, such as the irregular shape indicated.
* Initiate the MVIEW command:
* Type MVIEW or MV in the command line and press Enter.
* Select the Polygonal option:
* When prompted to specify the option, type P for Polygonal and press Enter.
* Define the viewport shape:
* Click to specify each vertex of the polygonal shape that matches the blue-hatched area in the exhibit. Continue clicking at each corner or bend in the shape until it is fully outlined.
* Complete the viewport:
* After specifying all vertices, press Enter to close the shape and complete the viewport creation.
This method ensures that your viewport matches the exact shape of the desired area, providing a tailored view of the drawing within that boundary.
NEW QUESTION # 60
You need to change the width of a specific polyline without affecting the width of the other polylines in a drawing.
What should you use?
- A. The PLINEGEN system variable
- B. The LWEIGHT command
- C. The PLINEWID system variable
- D. The PEDIT command
Answer: D
Explanation:
Explanation
polyline is a connected sequence of line segments created as a single object that can contain a width. You can change the width of a polyline by using the PEDIT command.
Based on 3 and 4, LWEIGHT is a command that sets the current lineweight, which is used for new objects and affects objects in the current space only. PLINEWID is a system variable that sets a default polyline width for new polylines. PLINEGEN is a system variable that controls how linetype patterns are generated around vertices.
https://www.roadlesstraveledstore.com/how-do-i-change-the-width-of-a-polyline-in-autocad/
https://knowledgeburrow.com/how-do-i-change-the-width-of-a-polyline-in-autocad/
NEW QUESTION # 61
You start the EXTEND command.
You need to be able to trim several objects quickly without exiting the EXTEND command.
What should you do?
- A. Hold the Alt key while selecting the objects.
- B. Hold the Ctrl key while selecting the objects.
- C. Hold the Ctrl+Shift key while selecting the objects.
- D. Hold the Shift key while selecting the objects.
Answer: D
Explanation:
Explanation
According to the AutoCAD for Design and Drafting documents1, the EXTEND command allows you to extend objects to meet the edges of other objects. To trim objects instead of extending them, you can hold down the Shift key while selecting the objects1. This will invoke the TRIM command within the EXTEND command.
https://autocadprojects.com/trim-and-extend-command/
NEW QUESTION # 62
A company's central server holds project directories that contain drawings. Team members who work onsite copy a directory locally to work offline.
Users often report that external references (xrefs) cannot be loaded after copying the project directories to their local machine from the company's central server.
How should you make sure that the users can load the xrefs without error?
- A. Set the Reference Type of the xrefs to Overlay
- B. Set the external references to use relative paths
- C. Set the external references to use absolute paths
- D. Set the Reference Type of the xrefs to Attachment
Answer: B
Explanation:
Explanation
the external references use relative paths to load them without error after copying them locally from a central server. This way, you can avoid broken links due to changes in drive letters or folder names.
https://grabcad.com/tutorials/working-with-external-references-xrefs-autocad
NEW QUESTION # 63
You have the drawing shown in the exhibit.
You need to place the polygon and the rectangle on the same layer as the circle.
Which command should you use to complete the task in the least number of steps?
- A. Match Properties
- B. Copy
- C. ByLayer
- D. Make Current (LAYMCUR)
Answer: A
Explanation:
Explanation
match properties is a command that allows you to apply the properties of one object to another object. You can use this command to change the layer of an object by selecting an object on the desired layer as a source.
To use this command, you can either:
* Click on the Match Properties icon in the Properties panel of the Home tab.
* Type MATCHPROP at the command prompt and press Enter.
Then, you can follow these steps:
* Select an object on the same layer as the circle as a source object and press Enter.
* Select the polygon and the rectangle as destination objects and press Enter.
Now you have placed the polygon and the rectangle on the same layer as the circle.
NEW QUESTION # 64
You have two viewports at different viewport scales as shown in the exhibit. The geometry and dimensions were created in model space.
The viewport scales are 1 16 and 1:5. The dimension text height is the same for both viewports in the layout.
Evaluate the graphic and complete the statements by selecting the correct options from the drop-down lists.
Answer:
Explanation:
Explanation
Box 1 = annotative
an annotative dimension style is a dimension style that automatically adjusts the size of dimensions based on the viewport scale. An annotative dimension style has an icon next to its name in the Dimension Style Manager dialog box. The dimension style is annotative because the dimension text height is the same for both viewports in the layout, even though they have different viewport scales1.
Box 2 = associativeThe DIMASSOC is at its default value of 2, therefore the dimensions are associative because they are linked to and update with the measured geometry3.
NEW QUESTION # 65
Refer to the exhibit.
A CAD designer modified an existing window schedule table into two sections by using table breaks.
Which combination of properties were used to modify the table to display as shown in the exhibit.
- A.
- B.
- C.
- D.
Answer: B
Explanation:
* Enable Table Breaks:
* Property Setting: Yes
* Explanation: Enabling table breaks allows the table to be divided into multiple segments.
* Direction:
* Property Setting: Down
* Explanation: The direction "Down" ensures that the table segments are arranged vertically one below the other.
* Repeat Top Labels:
* Property Setting: Yes
* Explanation: This ensures that the header row (top labels) is repeated at the beginning of each segment of the table, providing clarity and consistency across the split sections.
* Repeat Bottom Labels:
* Property Setting: No
* Explanation: Not repeating bottom labels ensures that only the top labels are repeated, which is generally sufficient for table readability and avoids redundancy.
* Manual Positions:
* Property Setting: No
* Explanation: Not using manual positions lets AutoCAD automatically position the breaks, simplifying the process.
* Manual Heights:
* Property Setting: No
* Explanation: Disabling manual heights allows AutoCAD to control the height of each segment automatically.
* Break Height:
* Property Setting: 2.7553
* Explanation: This value controls the height of the table breaks, determining how much content fits into each segment.
* Spacing:
* Property Setting: 0.5000
* Explanation: This value controls the spacing between the segments of the table, ensuring they are adequately separated for visual clarity.
By configuring these properties correctly, the CAD designer was able to split the window schedule table into two sections, maintaining readability and a clear structure as shown in the exhibits.
References:
* AutoCAD Help Documentation on Table Breaks
* AutoCAD User Manual on Managing and Formatting Tables
NEW QUESTION # 66
You have a drawing that contains three of the same objects.
Which object has layer transparency set to 90? Click the correct object in the answer area.
Answer:
Explanation:
Explanation:
According to the AutoCAD for Design and Drafting documents, layer transparency is a property that makes objects on a layer appear translucent or opaque. The higher the transparency value, the more transparent the layer appears. Therefore, the object that has layer transparency set to 90 is the one that appears the most faded or dimmed in the drawing. In this case, it is the object on the right. You can click on it to select your answer.
NEW QUESTION # 67
You have the office arrangement shown in exhibit 1. (Refer to the exhibit 1 tab.)
You need a mirror line to create the right-hand office arrangement shown in exhibit 2. (Refer to the exhibit 2 tab.)
Which tool would you use to make sure the mirror line is centered between the two wall lines without adding additional linework?
- A. Intersection (INT)
- B. Midpoint (MID)
- C. Mid Between Two Points (M2P)
- D. Endpoint (END)
Answer: C
Explanation:
https://www.tutorial-autocad.com/mirror-command
http://docs.autodesk.com/ACD/2011/ENU/filesMDG/WS1a9193826455f5ff2566ffd511ff6f8c7ca-3f53.htm
NEW QUESTION # 68
......
Autodesk ACP-01101 Certification Exam is an excellent way to demonstrate your expertise in using AutoCAD for drafting and design. It requires a significant amount of preparation, but the benefits of earning this certification are well worth the effort. If you're a professional in the architecture, engineering, or construction industries and you use AutoCAD regularly, consider taking the Autodesk ACP-01101 Certification Exam to take your career to the next level.
Achieving the Autodesk Certified Professional: AutoCAD for Drafting and Design certification demonstrates to potential employers or clients that an individual has the skills and knowledge needed to produce high-quality designs using AutoCAD. Autodesk Certified Professional: AutoCAD for Drafting and Design certification is recognized globally and can increase job opportunities and earning potential. By passing the Autodesk ACP-01101 exam, individuals can validate their proficiency and demonstrate their commitment to professional development in the field of drafting and design.
Autodesk ACP-01101 certification is highly regarded by employers and can open up opportunities for professionals in the drafting and design field. Autodesk Certified Professional: AutoCAD for Drafting and Design certification is also beneficial for those who are looking to enhance their skills and advance their careers. By acquiring the certification, candidates can demonstrate their proficiency in using AutoCAD, which is an essential skill required in various industries such as architecture, engineering, and construction.
Actual ACP-01101 Exam Recently Updated Questions with Free Demo: https://www.test4cram.com/ACP-01101_real-exam-dumps.html
Valid ACP-01101 exam with Autodesk Real Exam Questions: https://drive.google.com/open?id=1bcg-5ID4jYxOso3kuMuO_5hdLCq65Oaw