[Nov 24, 2021] ACMA-6.3 Exam Dumps - Try Best ACMA-6.3 Exam Questions - Test4Cram
Verified ACMA-6.3 exam dumps Q&As with Correct 88 Questions and Answers
NEW QUESTION 35
What information is required by an AP in order to boot? (Select three)
- A. AP's Name and Group
- B. Aruba Controller's Master IP Address
- C. An established NTP connection to the Master Controller
- D. AP's IP Address, Netmask, Default Gateway
- E. Establish an IPSEC tunnel with the Master controller
Answer: A,B,D
NEW QUESTION 36
How many Aruba controllers can be added to a single mobility domain?
- A. 128 controllers supporting 2000 users
- B. 256 controllers with no more than 1024 subnets
- C. Controllers supporting up to 6000 AP's
- D. 64 controllers of any type
- E. There is no controller limit
Answer: E
NEW QUESTION 37
What are the four views available in Visual RF Plan (Select four)?
- A. User VIew
- B. Floor Plan View
- C. Network, Campus and Building View
- D. Access Point View
- E. Controller View
Answer: A,B,C,D
NEW QUESTION 38
An access port has been placed in trusted mode. The Vlan on the port is in Untrusted mode. Which of the following statements is true?
- A. The traffic is untrusted since the VLAN is untrusted
- B. You cannot set Vlans as trusted or untrusted
- C. The traffic is trusted since the port is trusted
- D. Only traffic from that specific port is trusted, all other traffic is untrusted
- E. This is an invalid configuration, both must be set the same
Answer: A
NEW QUESTION 39
What does SET ORIENTATION option do in the Visual RF Plan edit tool?
- A. Give the option to resize a floor
- B. Sets the proper vertical floor plan alignment
- C. Sets the North/South orientation of the building
- D. Set the horizontal plane on each floor
- E. Allows the planner to set the directional antenna orientation
Answer: B
NEW QUESTION 40
When configuring a guest WLAN via the WLAN section of the startup wizard, which
security option is NOT available?
- A. WEP encryption
- B. Captive Portal with no authentication or registration
- C. Captive portal with email registration
- D. Captive portal with authentication via credentials
- E. Direct access to the internet with no captive portal
Answer: A
NEW QUESTION 41
Which roles must be configured via the startup wizard when captive portal is being configured (Select Two)
- A. The Logon Role
- B. Roles are not used on the Aruba system
- C. Pre-Authentication role
- D. Unauthenticated role
- E. Authenticated role
Answer: C,E
NEW QUESTION 42
Which is a Device Specific Attribute that can be evaluated in a user derivation rule?
- A. location by AP Name
- B. user login name
- C. controller IP
- D. controller Loopback address
- E. authentication server
Answer: A
NEW QUESTION 43
WPA and WPA2 can use the following authentication methods: (Select two)
- A. 802.1X
- B. WEP Keys
- C. Captive Portal
- D. PSK
- E. IPSEC
Answer: A,D
NEW QUESTION 44
When looking at clients in the 'Monitoring Clients' section of the Controller, which of the following information is NOT visible?
- A. Role
- B. Output power of client radio
- C. Method of authentication
- D. Age
- E. MAC address
Answer: B
NEW QUESTION 45
In Extensible Authentication Protocol (EAP) terminology the client station is called the:
- A. End node
- B. Station
- C. Authenticated Client
- D. Client Device
- E. Supplicant
Answer: E
NEW QUESTION 46
When configuring the Mobility Controller's internal DHCP via the startup wizard which option is NOT available for configuration (select two)?
- A. Default router
- B. Domain name
- C. Pod name
- D. Option 43
- E. Netbios name server
Answer: C,D
NEW QUESTION 47
Which of the following is true of an Aruba Mobility Controller acting as a layer 2 switch? (Select two):
- A. VLANs cannot have IP addresses
- B. The Mobility Controller acts as a bridge.
- C. Uplink ports on the Mobility Controller can use 802.1q tagging
- D. All stations must use the same VLAN
- E. The Mobility Controller is the client's default router.
Answer: B,C
NEW QUESTION 48
Visual RF Plan requires certain building information when defining a new building.
Which one of the following is NOT a user supplied building specification?
- A. Desired data rate
- B. Longitude and Latitude
- C. Attenuation between floors
- D. Building name
- E. Number of APs
Answer: E
NEW QUESTION 49
In what order does the AP dynamically discover the Master controller?
- A. DHCP option 43, DNS query, ADP Multicast, ADP Broadcast
- B. DNS query, ADP Broadcast, ADP Multicast, DHCP option 43
- C. ADP Multicast, ADP Broadcast, DHCP option 43, DNS query
- D. DHCP option 43, ADP Broadcast, ADP multicast, DNS Query
- E. DHCP option 43, ADP Multicast, ADP Broadcast, DNS query
Answer: E
NEW QUESTION 50
802.1X authentication takes place:
- A. Prior to granting access to L2 media
- B. After the user has an IP address
- C. After the user sees the captive portal page
- D. Once the IPSEC tunnel is up
- E. Prior to the user associating with the AP
Answer: A
NEW QUESTION 51
When a client is blacklisted, the controller will:
- A. Stop the client from associating with any SSID on the controller
- B. Send a message telling the client it has been blacklisted
- C. Block the client from the SSID he was connected to
- D. Only block the client if it hasn't yet associated with an AP
- E. De-authenticate the client from the network but allow it to keep transmitting data
Answer: A
NEW QUESTION 52
Which of the following core components of ARM enables intelligent distribution of clients across available channel capacity?
- A. Band steering
- B. Rogue AP detection
- C. Multi-band scan
- D. Coordinated Access to a Single Channel
- E. Spectrum load balancing
Answer: E
NEW QUESTION 53
Aliases are used in firewall policies to:
- A. Apply firewall polices to ports in a stateful manner
- B. Are a part of roles, not the firewall
- C. Ease readability and maintainability for source and destination addresses
- D. Are applied as an action in a rule
- E. Make firewall rules act like traditional ACLs
Answer: C
NEW QUESTION 54
When a barcode scanner connects to an AP, what is the 1st role that is assigned to it?
- A. Initial role
- B. MAC authentication default role
- C. 802.1X default role
- D. Server derived role
- E. User derived Role
Answer: A
NEW QUESTION 55
......
Aruba ACMA-6.3 Test Engine PDF - All Free Dumps: https://www.test4cram.com/ACMA-6.3_real-exam-dumps.html