NS0-176 Practice Exam and Study Guides - Verified By Test4Cram Updated 141 Questions
2022 Updated Verified Pass NS0-176 Study Guides & Best Courses
NEW QUESTION 19
When connecting the Nexus 1110-X to the Nexus switch, what Spanning Tree port type is used?
- A. Trunk
- B. Edge trunk
- C. Edge
- D. Normal
- E. Network
Answer: B
NEW QUESTION 20
When trying to configure a Virtual Port Channel (vPC), what might be a cause of the following error when trying to create the vPC domain?
Nexus-5548-B(config)# vpc domain 10
^% Invalid command at '^' marker.Nexus-5548-B(config)#
- A. Have not yet turned on the vpc feature using the 'feature vpc' command
- B. vPC domain cannot be configured at the global prompt
- C. The vPC domain has already been configured
- D. The vPC links have to be configured before the vPC domain can be added
Answer: A
NEW QUESTION 21
Which three elements are included in a UCS service profile? (Choose three.)
- A. server definition
- B. identity information
- C. switch configuration
- D. firmware revisions
- E. volume layout
Answer: A,B,D
NEW QUESTION 22
Which sends support summary information to NetApp through HTTPS?
- A. FlexSupport
- B. AutoSupport
- C. TechSupport
- D. SnapSupport
Answer: B
NEW QUESTION 23
Exhibit:
You have a NetApp cluster and have just performed a storage failover giveback command from the CLI.
Referring to the exhibit, what is the status of the storage failover process?
- A. The giveback is partially completed waiting for node cluster-01 to give back the partner's SFO aggregate.
- B. The giveback failed because cluster-01 was not able to communicate with the partner's cluster LIFs.
- C. The giveback is partially completed waiting for node cluster-02 to give back the partner's SFO aggregate.
- D. The giveback failed because the partner node was not in a "waiting for "giveback" state.
Answer: C
NEW QUESTION 24
When creating local user, which two are valid user names? (Choose two)
- A. 0
- B. somebody
- C. root
- D. daemon
- E. best_user
- F. 1greatuser
Answer: B,E
NEW QUESTION 25
A Cisco UCS system is operating in FC End-Host Mode. The fabric Interconnects are uplinked into Nexus 5672UP switches using native FC. The service profiles are unable to boot from SAN using FC.
When executing the show flogi database command on the Nexus switches, only the Fabric Interconnect port WWNs are visible. No service profile WWNs are shown.
What caused this issue?
- A. The Nexus switches do not have NPV enabled.
- B. The Nexus must be configured for FCoE instead of native Fibre Channel.
- C. The Nexus switches do not have NPIV enabled.
- D. The zoning on the Nexus switches is incorrect.
Answer: C
NEW QUESTION 26
You are deploying a new virtual machine (VM). Your customer requires that the VM cannot reserve space on the VMFS filesystem, and the VM can only consume blocks when data is written to disk from and within the VM/Guest OS.
Which virtual disk should you create to meet these requirements?
- A. Independent Nonpersistent
- B. Thin Provision
- C. Thick Provision Lazy Zeroed
- D. Thick Provision Eager Zeroed
Answer: B
NEW QUESTION 27
Which management tool is used to configure and monitor centralized policies for multiple Cisco UCS domains?
- A. UCS Director
- B. UCS Manager
- C. UCS Central
- D. UCS Performance Manager
Answer: C
NEW QUESTION 28
Exhibit:
Which hardware component is shown in the exhibit?
- A. Fl
- B. VIC
- C. GEM
- D. IOM
Answer: D
NEW QUESTION 29
Which two operating modes are available with the Nexus 9000 Series switches? (Choose two.)
- A. Cisco IOS
- B. Cisco ACI
- C. Cisco NX-OS
- D. Cisco IOS EX
Answer: B,C
NEW QUESTION 30
You have a FlexPod solution with Cisco 6296UP Fabric Interconnects. You currently have a direct-attached AFF8040 system using FCoE for storage connectivity. You would like to reconfigure the FlexPod so that the storage is connected through the upstream switches.
Using UCS Manager, which two steps would you perform to accomplish this task? (Choose two.)
- A. Using the Configure Unified Ports wizard, change the port types to FC.
- B. Configure the FI ports with the FCoE Uplink role.
- C. Using the Configure Unified Ports wizard, change the port types to Ethernet.
- D. Configure the FI ports with the Uplink role.
Answer: A,D
NEW QUESTION 31
How do the Fabric Interconnect ports connecting to the 2232PP FEX have to be configured?
- A. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Uplink'
- B. In UCS Manager, the FI ports connecting to the FEX must be set as type 'FEX'
- C. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Auto'
- D. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Server'
- E. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Network'
Answer: D
NEW QUESTION 32
You run NetApp ConfigAdvisor against you FAS8060A storage system. The report states that the flow control settings for ports e0a on each node are incorrect.
Which set of commands will correct this problem?
- A. network interface modify- node netapp-01 -port e0a -flowcontrol -admin none network interface modify -node netapp-02 -port e0a -flowcontrol - admin none
- B. network port modify- node netapp-01 port e0a-flowcontrol-admin full network port modify- node netapp-02 port e0a-flowcontrol-admin full
- C. network interface modify- node netapp-01 port e0a-flowcontrol-admin full network interface modify- node netapp-02 port e0a-flowcontrol-admin full
- D. network port modify -node netapp-01 -port e0a -flowcontrol-admin none network port modify -node netapp-02 -port e0a -flowcontrol-admin none
Answer: D
NEW QUESTION 33
When configuring a FlexPod environment for iSCSI boot with Cisco UCS, which item should be preconfigured?
- A. Zonesets should be created.
- B. IQN and IP address of target.
- C. All zoning should be configured.
- D. WWPN Pools.
Answer: B
NEW QUESTION 34
There are 2 chassis tied to a pair of Fabric Interconnects.
First chassis, chassis-1, has 1 link between single IOM and Fabric Module. Second chassis, chassis-4, has 4 links between single IOM and Fabric Module. Chassis discovery policy is set for 2 links.
Which statement is true?
- A. Both chassis will be added to UCS Domain utilizing all links only after performing chassis acknowledgment.
- B. Both chassis will be added to UCS Domain utilizing all links. No additional steps needed.
- C. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating and no additional steps needed.
- D. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating after chassis acknowledgement.
Answer: D
NEW QUESTION 35
A server administrator calls you complaining that an uplink on both UCS Fabric Interconnects went down. Each Fabric Interconnect has a vPC to the Nexus 500 switches.
After logging in to the switches, you notice that all vPC member ports on the secondary vPC peer switch are down. The vPC peer keepalive is still operational.
What is the problem in this scenario?
- A. Both UCS Fabric Interconnects rebooted.
- B. The vPC peer link is down.
- C. A new VLAN was added to the UCS vPC member ports.
- D. The vPC feature is disabled.
Answer: B
NEW QUESTION 36
Which two are true about Fabric Interconnect L1 and L2 ports in cluster mode? (Choose two)
- A. Ports can only run as a port channel
- B. Fabric Interconnect ports L1 and L2 are 10 Gb links
- C. Ports can run as a port channel or as individual links
- D. Fabric Interconnects connected via L1/L2 have to be the same model except during the upgrade
- E. Ports are primarily used for management traffic, but can be used for data traffic as well
- F. Ports can only run as individual links
Answer: A,D
NEW QUESTION 37
......
Ultimate Guide to the NS0-176 - Latest Edition Available Now: https://www.test4cram.com/NS0-176_real-exam-dumps.html