[Q23-Q45] 100% Guaranteed Results 500-920 Unlimited 42 Questions [2021]

100% Guaranteed Results 500-920 Unlimited 42 Questions [2021]

500-920 Dumps PDF - Want To Pass 500-920 Fast

Cisco 500-920 Exam Syllabus Topics:

NEW QUESTION 23
Which statement regarding the UCS C-senes connectivity modes best describes connectivity options in a UCS Manager integrated environment?

• A. UCS C-series servers may be connected to multiple UCS Manager domains at the same time
• B. UCS C-series servers may be connected with or without the use of Fabric Extenders (FEX) in environments running UCS Manager Software Release 2 2 or later
• C. UCS C-series servers must be connected to Fabric Interconnects using Fabric Extenders (FEX)
• D. All UCS C-series servers in a single UCS Manager domain must share the same connectivity model

Answer: B

NEW QUESTION 24
You are experiencing intermittent connectivity issues on one specific Cisco UCS server Some applications work, while other do not transfer data You suspect jumbo frames limitations Which two places do you check the jumbo frame settings? (Choose two )

• A. Check server's service profile and/or service profile template
• B. Check upstream switch ports frame size configuration
• C. Check the fibre channel port configuration for jumbo frame configuration
• D. Check server's individual vNICs and/or vHBAs properties
• E. Check server's QoS System Class

Answer: B,E

NEW QUESTION 25
When server is booting from SAN, which command verifies the PLOGI sessions with the target?

• A. Lunmap
• B. FCMap
• C. FCIist
• D. Lunlist

Answer: D

NEW QUESTION 26
You are in the process of upgrading your UCS M3 Server to a newer UCS M4 Server. You associate the Service Profile to the new UCS Server, but it fails to boot You suspect of a failed boot hard drive. You check your RAID1 Boot LUN in UCS Manager, but see no error messages What could be causing the issue?

• A. The newer Cisco UCS M4 Server is using disks of larger capacity than the previous UCS M3 Server
• B. A misconfiguration on the Service Profile Local Boot Policy
• C. A misconfiguration on the Service Profile Local Disk Policy
• D. The newer Cisco UCS M4 Server is using flash drives, not hard drives

Answer: D

NEW QUESTION 27
Which two ports on a pair of Cisco Fabric Interconnects must be properly cabled for the pair to form a cluster? (Choose two )

• A. L1 > L2
• B. L2 > L1
• C. L1 > L1
• D. L2 > L2

Answer: C,D

NEW QUESTION 28
Which two formats can be configured for Cisco's Call Home email message? (Choose two )

• A. CSV
• B. XML
• C. Full text
• D. JSON

Answer: B,C

Explanation:
Call Home Message Formats The Call Home feature offers the following message formats: * Short Text - Suitable for pagers or printed reports. * Plain Text - Full formatted message information suitable for human reading. * XML - Matching readable format using Extensible Markup Language (XML) and Adaptive Markup Language (AML) document type definitions (DTDs). The XML format enables communication with the Cisco TAC. For user-defined destination profiles, the format options are long-text, short-text, or XML. The default is XML. For the predefined Cisco TAC profile, only XML is allowed.
Reference:
http://www.audentia-gestion.fr/cisco/smart-call-home-feature-guide-1611.pdf

NEW QUESTION 29
In a Cisco UCS Manager, if all KVM sessions to each server fail to start, what is likely causing the problem?

• A. Cisco UCS Manager has a problem
• B. The I/O Modules in the chassis are the problem
• C. The workstation you are using to connect to the KVM session is the problem
• D. The Fabric Interconnect to which you are connected has a problem

Answer: C

NEW QUESTION 30
After performing a UCS firmware upgrade, which two UCS components will require updated drivers? (Choose two )

• A. RAID Controllers
• B. Cisco Fabric Interconnects
• C. Cisco UCS Manager
• D. VIC Cards and Fiber Channel HBAs

Answer: B,D

NEW QUESTION 31
Which ethernet port type is used when configuring UCS Fabric Interconnect connections to Cisco UCS C-series servers?

• A. Direct Connect Port
• B. Uplink Port
• C. Server Port
• D. Service Profile Port

Answer: B

NEW QUESTION 32
The command show interface veth 705 is telling you that the bound interface is Ethernet 3/1/2 What is the location of the blade that has veth 705 associated to it?

• A. Chassis 1. Slot 2
• B. Chassis 3. Slot 2
• C. Chassis 3, Slot 1
• D. There is not enough information

Answer: C

NEW QUESTION 33
The UCS Chassis Discovery Policy has been set to four and a new chassis is connected with two links What is the resulting chassis recognition action?

• A. The chassis will be recognized but only one of the links will be active.
• B. The Chassis Discovery Policy will automatically reset to two links, since it always tracks the physical connections
• C. The chassis will be recognized and both links will be active
• D. The chassis will not be recognized

Answer: D

NEW QUESTION 34
Which Cisco UCS internal component maintains the UCS XML database, manages the FSM stages and operations and instructs the Application Gateway to perform operations on physical and logical elements?

• A. Cisco Finite State Machine
• B. Cisco Data Management Engine
• C. Cisco Application Gateways
• D. Cisco UCS Manager

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System-Monitoring/3-1/b_UCSM_GUI_System_Monitoring_Guide_3_1/b_UCSM_GUI_System_Monitoring_Guide_3_1_chapter_0100.html

NEW QUESTION 35
When troubleshooting UCS initialization issues that require Fabric Interconnect reboots, which Fabric Interconnect should be rebooted first?

• A. Both Fabric Interconnects must be rebooted simultaneously
• B. The subordinate Fabric Interconnect
• C. The primary Fabric Interconnect
• D. The Cisco UCS Manager will determine with Fabric Interconnect to reboot

Answer: C

NEW QUESTION 36
An overvoltage condition has occurred on a UCS server However the Cisco IMC System Event Log (SEL) file is full What is the resulting fault logging action?

• A. The overvoltage condition event will not be recorded in the SEL.
• B. The oldest entry in the SEL will be overwritten by the overvoltage condition event
• C. The SEL is not used to record server related events, such as overvoltage conditions.
• D. The newest entry in the SEL will be overwritten by the overvoltage condition event.

Answer: A

NEW QUESTION 37
In Cisco UCS, there are several interfaces involved on the packet path from the vNIC through the adapter, IOM to finally reach Pi Which is the order of those interfaces, starting from the vNIC?

• A. VIF, UIF, HIF, SIR NIF
• B. HIF. NIF, UIF, VIF SIF
• C. VIF, UIF, HIF, NIF SIF
• D. HIF. SIF, VIF, UIF NIF

Answer: A

NEW QUESTION 38
Which statement is true when using SPAN for Fibre Channel (FC) Traffic?

• A. Any port can be used as a SPAN destination port Even if it is defined as Eth uplink port it will be automatically converted to FC uplink port
• B. FC port on Cisco UCS 6238UP can be used as a SPAN source
• C. For FC SPAN sessions we do not have to specifically enable the monitoring session
• D. When defining FC uplink port as the SPAN destination, system will automatically stop using that port as an uplink port

Answer: B

NEW QUESTION 39
......

Updated Verified 500-920 Q&As - Pass Guarantee: https://www.test4cram.com/500-920_real-exam-dumps.html