Get 100% Real HPE0-J69 Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!
HPE0-J69 Premium Files Updated Oct-2023 Practice Valid Exam Dumps Question
NEW QUESTION # 48
You are presenting the HPE StoreEver portfolio to a media agency.
What advantage is offered when using LTFS?
- A. file and block data management within an HPE HSM solution
- B. file encryption with public and private key management
- C. WORM functionality for file, block and object storage access on tape
- D. file management capabilities will be provided with tape cartridges
Answer: D
NEW QUESTION # 49
A customer has mission-critical applications that intermittently experience heavy disk I/O. The storage speed has the most impact on the application's performance. The customer does not want to dedicate SSD disks to these applications because additional performance is only needed periodically, and moving the volumes between tiers takes too long.
Which HPE StoreVirtual VSA feature can address this customer's challenge?
- A. Adaptive Optimization
- B. Thin Provisioning
- C. Space Reclamation
- D. Storage virtualization
Answer: A
NEW QUESTION # 50
A customer wants to expand his cascaded B-series based SAN but is concerned about latencies within the SAN backend. You recommend changing the topology to a full mesh.
Which switch feature will ensure that the latencies in the backend are at the lowest possible level?
- A. VSF
- B. FSPF
- C. LACP
- D. NPIV
Answer: B
NEW QUESTION # 51
You are designing a new HPE 3PAR StoreServ solution.
Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?
- A. SAF Collect
- B. Storage Sizing Tool
- C. One Config Advanced
- D. NinjaSTARS
Answer: C
NEW QUESTION # 52
Match the feature to the appropriate C-Series DCNM license type.
Answer:
Explanation:
Explanation
Graphical user interface, application Description automatically generated
NEW QUESTION # 53
You have just completed a performance analysis of an HPE 3PAR StoreServ 8400 disk array with different tiers at a customer's site. After reviewing the performance metrics, you determine that they should install a new tier of SSD drives.
Which actions should you recommend they take to fully optimize the array? (Choose two.)
- A. Configure dedicated drives to enable Adaptive Flash Cache.
- B. Configure Adaptive Flash Cache.
- C. Configure scheduled tunesys tasks.
- D. Rebalance all flash drives between nodes 0 and 2.
- E. Configure Adaptive Optimization.
Answer: C,E
NEW QUESTION # 54
Match each address with the associated address type.
Answer:
Explanation:
Explanation
Graphical user interface, text, application Description automatically generated
NEW QUESTION # 55
An existing Nimble customer is interested in adding storage to their environment to store his Backups, but has a constrained budget and limited personal .The solution must scale to allow for substantial growth over the next five years?
- A. Nimble AF series
- B. Nimble cloud volume
- C. Nimble CS series
- D. Nimble SF series
Answer: A
NEW QUESTION # 56
How does the HPE StoreVirtual VSA storage platform scale performance and capacity?
- A. aggregates all resources into a single storage pool
- B. enables access through multiple protocols
- C. recreates storage pools on multiple devices
- D. eliminates the need for storage controllers
Answer: C
NEW QUESTION # 57
Refer to the exhibit.
A customer purchased a Primera C6S0 array to replace several older 3PAR arrays. They plan to upgrade the system as each 3PAP reaches the end of its lease. The initial sizing included 100TB effective capacity for an Oracle database environment.
The first 3PAR to come off lease has 100TB of VDI boot images that support thousands of users.
Which addition to the Primera should you recommend?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option A
- D. Option D
Answer: A
NEW QUESTION # 58
Which storage sizing tool, designed specifically for the HPE 3PAR StoreServ environment, shows the expected deduplication ratio based on actual data analysis of the customer's current environment?
- A. StoreVista
- B. NinjaStars
- C. NinjaThin
- D. NinjaCrawler
Answer: B
NEW QUESTION # 59
You are configuring a new HPE 3PAR solution and need to create a new disk group with a defined RAID level.
Click the appropriate option where the RAID can be selected.
Answer:
Explanation:
Explanation
NEW QUESTION # 60
Refer to the exhibit.
You create two snapshots of a thin provisioned base volume in an HPE Primera. One snapshot is read only and the other is read-write. A write occurs at the location shown in in the diagram.
Place the actions on the left into the order they are taken on the right.
Answer:
Explanation:
Explanation
A picture containing diagram Description automatically generated
NEW QUESTION # 61
Which software feature should an HPE 3PAR Storeserv 8000 customer use to optimize data protection and recovery, Including rapid online recovery for his VMware environment?(select two)
- A. HPE 3PAR Security software suite
- B. HPE 3PAR File persona Software suite
- C. HPE StoreOnce recovery manager central for VMware
- D. HPE 3PAR Remote copy software
- E. HPE 3PAR Virtual Copy software
Answer: C,E
NEW QUESTION # 62
A customer is concerned about the business risks of non-compliance for long-term data protection, retention, immutability, and encryption on petabytes of data consisting of millions of objects in a global namespace across multiple geographic locations.
Which products should you recommend to the customer to address their concern? (Choose two.)
- A. HPE 3PAR StoreServ 9000
- B. HPE Complete Veeam
- C. HPE Scality RING on HPE Apollo Servers
- D. HPE StoreOnce Systems
- E. HPE Complete iTernity iCAS
Answer: D,E
NEW QUESTION # 63
A customer needs to expand an HPE StoreVirtual VSA based cluster with two additional VSA instances.
What do you need to consider when designing the new VSA instances?
- A. They can only have equal to or smaller capacity compared to the existing instances.
- B. They must be of equal or greater capacity than the existing instances in a cluster.
- C. They will require downtime to re-balance the resources within the cluster.
- D. They must be configured into a new management group.
Answer: B
NEW QUESTION # 64
You are designing a new enterprise array solution. The customer is interested in a caching tier that provides extremely low-latency and persistent storage at the same time. They also need to support more than 500GB.
Which technology should you recommend?
- A. SRAM
- B. NAND SSD
- C. DRAM
- D. NVMe SCM
Answer: B
NEW QUESTION # 65
A customer environment includes:
10 DL380 Gen8 servers in a VMware Cluster
2 MSA storage arrays
2 8GB b-series fibre channel switches
The customer needs to replace their environment because it is end of life. They have limited budget. The customer is primarily concerned with management because they have limited IT staff, and they want to move away from fibre channel.
Which HPE Storage should you recommend?
- A. HPE Nimble dHCI
- B. HPE XP8
- C. HPE Primera
- D. HPE StoreOnce
Answer: C
NEW QUESTION # 66
......
REAL HPE0-J69 Exam Questions With 100% Refund Guarantee : https://www.test4cram.com/HPE0-J69_real-exam-dumps.html
Practice with HPE0-J69 Dumps for HPE ASE Certified Exam Questions & Answer: https://drive.google.com/open?id=1ZJNYUgeGrECuSg2ZwFBNWLck_rgL82kK