Real Cisco 300-715 Exam Dumps with Correct 153 Questions and Answers [Q44-Q66]

Real Cisco 300-715 Exam Dumps with Correct 153 Questions and Answers

Valid 300-715 Test Answers & Cisco 300-715 Exam PDF

Exam Topics

The Cisco 300-715 exam measures the applicants’ expertise related to a variety of knowledge areas. The skills measured within this certification test can be grouped into seven domains that are outlined below:

• Architecture & Deployment – 10%

This topic checks the expertise of the examinees in configuring personas as well as describing deployment options.

• Policy Enforcement – 25%

Within this domain, the test takers are required to demonstrate that they are capable of configuring native LDAP and AD; describing identity store options (including LDAP, AD, PKI, OTP, Smart Card, and Local); configuring wired/wireless 802.1X network access. Besides that, the students should be conversant with configuring 802.1X phasing deployment (including monitor mode, closed mode, low impact); configuring network access devices; applying MAB; configuring Cisco TrustSec; configuring policies such as authorization and authentication profiles.

• Web Auth and Guest Services – 15%

To answer the questions from this subject area, the applicants need to have the ability to customize web authentication, customize guest access services as well as customize guest and sponsor portals.

• Profiler – 15%

This section encompasses such skills as implementing profiler services; implementing probes; implementing CoA; configuring endpoint identity management.

• BYOD – 15%

Here the learners must prove that they possess competency in describing Cisco BYOD functionality (including solution components, utilization cases & requirements, as well as BYOD flow); customizing BYOD device on-boarding with the help of internal CA with Cisco wireless LAN controllers as well as Cisco switches; configuring certificates for BYOD; configuring allow list/block list.

• Endpoint Compliance – 10%

This objective requires that the candidates have an understanding of describing posture services, endpoint compliance, as well as client provisioning. They should also be conversant with configuring posture policy, conditions, client provisioning; configuring the compliance module; configuring Cisco ISE posture agents as well as operational modes; describing supplicant, authenticator, server, and supplicant options.

• Network Access Device Administration – 10%

This last part of the certification test comprises of such abilities as comparing AAA protocols and configuring TACACS+ device administration & command authorization.

The percentages provided next to the domains’ titles indicate the share of the questions in the exam content. During your preparation for the test, you need to pay special attention to the topics with higher weights. However, only the mastery of all these objectives guarantees success in Cisco 300-715. Note that the above-mentioned sections are just the provisionary guidelines for the candidates and other subject areas can be included in the specific delivery of the exam without any notice.

NEW QUESTION 44
Which term refers to an endpoint agent that tries to join an 802 1X-enabled network?

• A. client
• B. authenticator
• C. EAP server
• D. supplicant

Answer: D

Explanation:
Reference:
https://www.oreilly.com/library/view/cisco-ise-for/9780133103632/ch16.html#:~:text=What%20is%20a%20supplicant%3F,networks%2C%20both%20wired%20and%20wireless.&text=The%20802.1X%20transactions%20are,Identity%20Services%20Engine%20(ISE).

 

NEW QUESTION 45
Which personas can a Cisco ISE node assume?

• A. policy service, gatekeeping, and monitonng
• B. administration, policy service, and monitoring
• C. administration, policy service, gatekeeping
• D. administration, monitoring, and gatekeeping

Answer: B

Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.html The persona or personas of a node determine the services provided by a node. An ISE node can assume any or all of the following personas: Administration, Policy Service, and Monitoring. The menu options that are available through the administrative user interface are dependent on the role and personas that an ISE node assumes. See Cisco ISE Nodes and Available Menu Options for more information.

 

NEW QUESTION 46
What is needed to configure wireless guest access on the network?

• A. WEBAUTH ACL for redirection
• B. Captive Portal Bypass turned on
• C. endpoint already profiled in ISE
• D. valid user account in Active Directory

Answer: A

 

NEW QUESTION 47
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)

• A. SNMP
• B. DHCP
• C. HTTP
• D. RADIUS
• E. NetFlow

Answer: B,D

Explanation:
Explanation
Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints. For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data. The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide

 

NEW QUESTION 48
A network security engineer needs to configure 802.1X port authentication to allow a single host to be authenticated for data and another single host to be authenticated for voice. Which command should the engineer run on the interface to accomplish this goal?

• A. authentication host-mode multi-host
• B. authentication host-mode multi-auth
• C. authentication host-mode multi-domain
• D. authentication host-mode single-host

Answer: C

 

NEW QUESTION 49
A network administrator changed a Cisco ISE deployment from pilot to production and noticed that the JVM memory utilization increased significantly. The administrator suspects this is due to replication between the nodes What must be configured to minimize performance degradation?

• A. Enable the endpoint attribute filter
• B. Review the profiling policies for any misconfiguration
• C. Change the reauthenticate interval.
• D. Ensure that Cisco ISE is updated with the latest profiler feed update

Answer: A

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/admin_guide/b_ise_admin_guide_23/b_ise_admin_guide

 

NEW QUESTION 50
An engineer is testing Cisco ISE policies in a lab environment with no support for a deployment server. In order to push supplicant profiles to the workstations for testing, firewall ports will need to be opened. From which Cisco ISE persona should this traffic be originating?

• A. authentication
• B. policy service
• C. administration
• D. monitoring

Answer: A

 

NEW QUESTION 51
Refer to the exhibit.

An organization recently implemented network device administration using Cisco ISE. Upon testing the ability to access all of the required devices, a user in the Cisco ISE group IT Admins is attempting to login to a device in their organization's finance department but is unable to. What is the problem?

• A. The authorization policy doesn't correctly grant them access to the finance devices.
• B. The finance location is not a condition in the policy set.
• C. The IT training rule is taking precedence over the IT Admins rule.
• D. The authorization conditions wrongly allow IT Admins group no access to finance devices.

Answer: B

 

NEW QUESTION 52
Refer to the exhibit.

A network engineers configuring the switch to accept downloadable ACLs from a Cisco ISC server Which two commands should be run to complete the configuration? (Choose two)

• A. ip device tracking
• B. aaa authorization auth-proxy default group radius
• C. radius-server attribute 8 include-in-access-req
• D. radius server vsa sand authentication
• E. dot1x system-auth-control

Answer: C,D

 

NEW QUESTION 53
What is a function of client provisioning?

• A. Client provisioning ensures that endpoints receive the appropriate posture agents.
• B. Client provisioning checks the existence, date, and versions of the file on a client.
• C. Client provisioning ensures an application process is running on the endpoint.
• D. Client provisioning checks a dictionary attribute with a value.

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_client_prov.html#:~:text=After%20Cisco%20ISE%20classifies%20a,packages%20and%20profiles%2C%20if%20necessary.

 

NEW QUESTION 54
Which port does Cisco ISE use for native supplicant provisioning of a Windows laptop?

• A. UDP 1812
• B. TCP 8909
• C. TCP 8905
• D. TCP 443

Answer: B

 

NEW QUESTION 55
During BYOD flow, from where does a Microsoft Windows PC download the Network Setup Assistant?

• A. Cisco ISE directly
• B. Microsoft App Store
• C. Native OTA functionality
• D. Cisco App Store

Answer: A

 

NEW QUESTION 56
Which three default endpoint identity groups does Cisco ISE create? (Choose three.)

• A. endpoint
• B. unknown
• C. whitelist
• D. blacklist
• E. profiled

Answer: B,D,E

Explanation:
Section: Profiler
Explanation/Reference: https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ ise10_man_identities.html#wp1203054

 

NEW QUESTION 57
What must match between Cisco ISE and the network access device to successfully authenticate endpoints?

• A. certificate
• B. SNMP version
• C. profile
• D. shared secret

Answer: D

Explanation:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_network_devices.html

 

NEW QUESTION 58
An administrator is migrating device administration access to Cisco ISE from the legacy TACACS+ solution that used only privilege 1 and 15 access levels. The organization requires more granular controls of the privileges and wants to customize access levels 2-5 to correspond with different roles and access needs. Besides defining a new shell profile in Cisco ISE. what must be done to accomplish this configuration?

• A. Define the command privileges for levels 2-5 in the IOS devices
• B. Enable the privilege levels in Cisco ISE
• C. Enable the privilege levels in the IOS devices.
• D. Define the command privileges for levels 2-5 in Cisco ISE

Answer: C

Explanation:
https://learningnetwork.cisco.com/s/blogs/a0D3i000002eeWTEAY/cisco-ios-privilege-levels

 

NEW QUESTION 59
What is a requirement for Feed Service to work?

• A. Cisco ISE has Internet access to download feed update.
• B. TCP port 8080 must be opened between Cisco ISE and the feed server.
• C. Cisco ISE has a base license.
• D. Cisco ISE has access to an internal server to download feed update.

Answer: D

Explanation:
Section: Architecture and Deployment

 

NEW QUESTION 60
Which personas can a Cisco ISE node assume'?

• A. policy service, gatekeeping, and monitoring
• B. administration, policy service, and monitoring
• C. administration, policy service, gatekeeping
• D. administration, monitoring, and gatekeeping

Answer: B

Explanation:
Reference:
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.html The persona or personas of a node determine the services provided by a node. An ISE node can assume any or all of the following personas: Administration, Policy Service, and Monitoring. The menu options that are available through the administrative user interface are dependent on the role and personas that an ISE node assumes. See Cisco ISE Nodes and Available Menu Options for more information.

 

NEW QUESTION 61
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.

Answer:

Explanation:

Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.

 

NEW QUESTION 62
Which two task types are included in the Cisco ISE common tasks support for TACACS+ profiles?
(Choose two.)

• A. Firepower
• B. Shell
• C. WLC
• D. IOS
• E. ASA

Answer: B,C

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_0100010.html TACACS+ Profile TACACS+ profiles control the initial login session of the device administrator. A session refers to each individual authentication, authorization, or accounting request. A session authorization request to a network device elicits an ISE response. The response includes a token that is interpreted by the network device, which limits the commands that may be executed for the duration of a session. The authorization policy for a device administration access service can contain a single shell profile and multiple command sets. The TACACS+ profile definitions are split into two components:
Common tasks
Custom attributes
There are two views in the TACACS+ Profiles page (Work Centers > Device Administration > Policy Elements > Results > TACACS Profiles)-Task Attribute View and Raw View. Common tasks can be entered using the Task Attribute View and custom attributes can be created in the Task Attribute View as well as the Raw View.
The Common Tasks section allows you to select and configure the frequently used attributes for a profile. The attributes that are included here are those defined by the TACACS+ protocol draft specifications. However, the values can be used in the authorization of requests from other services. In the Task Attribute View, the ISE administrator can set the privileges that will be assigned to the device administrator. The common task types are:
Shell
WLC
Nexus
Generic
The Custom Attributes section allows you to configure additional attributes. It provides a list of attributes that are not recognized by the Common Tasks section. Each definition consists of the attribute name, an indication of whether the attribute is mandatory or optional, and the value for the attribute. In the Raw View, you can enter the mandatory attributes using a equal to (=) sign between the attribute name and its value and optional attributes are entered using an asterisk (*) between the attribute name and its value. The attributes entered in the Raw View are reflected in the Custom Attributes section in the Task Attribute View and vice versa. The Raw View is also used to copy paste the attribute list (for example, another product's attribute list) from the clipboard onto ISE. Custom attributes can be defined for nonshell services.

 

NEW QUESTION 63
What must match between Cisco ISE and the network access device to successfully authenticate endpoints?

• A. certificate
• B. SNMP version
• C. profile
• D. shared secret

Answer: D

Explanation:
Section: Endpoint Compliance
Explanation/Reference: https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_network_devices.html

 

NEW QUESTION 64
What is a requirement for Feed Service to work?

• A. TCP port 3080 must be opened between Cisco ISE and the feed server
• B. Cisco ISE has a base license.
• C. Cisco ISE has Internet access to download feed update
• D. Cisco ISE has access to an internal server to download feed update

Answer: B

 

NEW QUESTION 65
Which two values are compared by the binary comparison (unction in authentication that is based on Active Directory?

• A. user-presented certificate and a certificate stored in Active Directory
• B. subject alternative name and the common name
• C. user-presented password hash and a hash stored in Active Directory
• D. MS-CHAPv2 provided machine credentials and credentials stored in Active Directory

Answer: B

Explanation:
Basic certificate checking does not require an identity source. If you want binary comparison checking for the certificates, you must select an identity source. If you select Active Directory as an identity source, subject and common name and subject alternative name (all values) can be used to look up a user. https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/ b_ise_admin_guide_sample_chapter_01110.html

 

NEW QUESTION 66
......

More about 300-715 Evaluation

The Cisco 300-715 test is categorized among other concentration tests where you only have to pass one. You select and take it after clearing the core exam called 350-701. With exam 300-715, each candidate has 1.5 hours to comprehensively answer all the questions presented to him or her. Listed below are the exam domains:

• BYOD;
• Profiler;
• Policy enforcement;
• Architecture & deployment;
• Endpoint compliance;
• Device administration for network access.
• Web authentication & guest services;

Please note, other topics might be covered in the final exam but the above-listed are the commonly tested areas. If you intend to sit for 300-715 exam, enroll in the ‘Implementing and Configuring Cisco ISE’ course to help you prepare. Study guides also make great sources of information about the real test.

Prerequisites

This certification exam has no official prerequisites. However, it is recommended that the candidates know about Cisco IOS Software Command-Line Interface, Cisco AnyConnect Secure Mobility Client, 802.1X, and Microsoft Windows OS. The intended audience for the test is ISE Administrators, Cisco Integrators and Partners, Wireless Network Security Engineers, and Network Security Engineers.

300-715 Exam Questions and Valid PMP Dumps PDF: https://www.test4cram.com/300-715_real-exam-dumps.html

Cisco 300-715 Certification Real 2021 Mock Exam: https://drive.google.com/open?id=1E2Xr7zZ6uo8UDq9y0Cxmfy4MZw7MvgX3