Real VMware 5V0-32.21 Exam Dumps with Correct 56 Questions and Answers
Valid 5V0-32.21 Test Answers & VMware 5V0-32.21 Exam PDF
VMware 5V0-32.21 exam tests the candidate's ability to deploy, manage, and troubleshoot VMware Cloud Provider Platform environments. 5V0-32.21 exam covers various topics such as VMware Cloud Provider Platform architecture, VMware vCloud Director, VMware NSX-T Data Center, VMware vSphere, and VMware Cloud Provider Hub. 5V0-32.21 exam also tests the candidate's knowledge of VMware Cloud Provider Program, pricing, and licensing.
NEW QUESTION # 13
Which three resources are considered to be cloud resources in VMware Cloud Director? (Choose three.)
- A. NSX ALB controllers
- B. Organization Virtual Data Center
- C. ESXi hosts
- D. Network Pools
- E. External Networks
- F. VMware vSphere Virtual Data Center
Answer: B,D,E
NEW QUESTION # 14
An administrator is configuring and managing multisite deployments.
Which Association Member Status is an invalid status?
- A. Active
- B. Unreachable
- C. Asymmetric
- D. Inactive
Answer: D
Explanation:
https://docs.vmware.com/en/VMware-Cloud-Director/10.0/com.vmware.vcloud.spportal.doc/GUID-6BF0EE6A-D5F0-4918-BD74-40892D2880B0.html ACTIVE - The association has been established by both parties, and communication with remote party was successful.
ASYMMETRIC - The association has been established at the local site, but the remote site has not yet reciprocated. UNREACHABLE - An association has been created by both parties, but the remote site is not currently reachable on the network.
NEW QUESTION # 15
Which two steps are mandatory before upgrading VMware Cloud Director appliances from 10.1 to 10.2? (Choose two.)
- A. Change the database failover from Manual to Automatic.
- B. Take a snapshot of the primary VCD appliance.
- C. Change the database failover from Automatic to Manual.
- D. Take a snapshot of the standby VCD appliance.
- E. Take a snapshot of the entire VCD appliances cluster.
Answer: B,C
Explanation:
https://docs.vmware.com/en/VMware-Cloud-Director/10.3/VMware-Cloud-Director-Install-Configure-Upgrade-Guide/GUID-BE64E6B6-EEB5-40FD-8797-45EF62854C06.html When upgrading from version 10.1 or later or when patching, if the automatic failover in case of a primary database service failure is enabled, change the failover mode to Manual during the upgrade. After the upgrade, you can set the failover mode to Automatic. See Automatic Failover of the VMware Cloud Director Appliance.
Log in to the vCenter Server instance on which resides the primary VMware Cloud Director appliance of your database high availability cluster.
Navigate to the primary VMware Cloud Director appliance, right-click it, and click Power > Shut Down Guest OS.
Right-click the appliance and click Snapshots > Take Snapshot. Enter a name and, optionally, a description for the snapshot, and click OK.
Right-click the VMware Cloud Director appliance and click Power > Power On.
NEW QUESTION # 16
A system administrator creates a common catalog to be used by all customers. For availability purposes, the catalog will be consumed by a different VMware Cloud Director instance in a different country.
Which catalog setting enables the catalog to be shared across VMware Cloud Director instances?
- A. Content library catalog
- B. Published catalog
- C. Subscribed catalog
- D. Shared catalog
Answer: B
Explanation:
Allow users to publish catalogs to organizations OUTSIDE of this cloud.
NEW QUESTION # 17
A cloud provider wants to limit the number of TKG clusters a tenant can provision while allowing other tenants an unlimited number of clusters.
Which setting will achieve this goal?
- A. Configure the storage quota on the VDC.
- B. Restrict them by specifying a quota in Organization settings.
- C. Configure restrictions inside the policy section if VMware Cloud Director.
- D. Restrict them through the Kubernetes Container Cluster Plugin.
Answer: B
NEW QUESTION # 18
An administrator is trying to add a new Provider VDC and wants to consume the vSphere storage policy immediately.
Which action should the System Administrator take next?
- A. Under Resources -> Infrastructure Resources, click "Reconnect" for the vCenter Server instance.
- B. Under Resources -> Infrastructure Resources, click "Update" for the vCenter Server instance.
- C. Under Resources -> Infrastructure Resources, click "Refresh Policies" for the vCenter Server instance.
- D. Under Resources -> Disable, and then Enable the vCenter Server instance.
Answer: C
Explanation:
https://docs.vmware.com/en/VMware-Cloud-Director/10.3/VMware-Cloud-Director-Service-Provider-Admin-Portal-Guide/GUID-965F12FC-A6B1-40C5-A31D-36A78B171040.html
NEW QUESTION # 19
What are three components in the VMware Cloud Director Availability solution that are used to enable migration from an on-premises data center to a service provider's VMware Cloud Director environment over the internet? (Choose three.)
- A. Cloud Tunnel Appliance
- B. VMware Cloud Director Availability On-Premises Appliance
- C. Cassandra database
- D. RabbitMQ Server
- E. Standalone Edge Appliance
- F. Cloud Replicator Appliance
Answer: A,B,F
NEW QUESTION # 20
What happens to a VM within an oVDC which uses the Pay-As-You-Go allocation model if there are insufficient resources?
- A. It powers on as the resources are assigned at the organization VDC level.
- B. It gets corrupted.
- C. It takes advantage of the resources of idle virtual machines.
- D. It fails to power on.
Answer: D
NEW QUESTION # 21
A system administrator has been tasked with creating a new network in preparation for onboarding a tenant with the following requirements:
* Provides a fully routed networking topology
* Advertises routes via BGP (Border Gateway Protocol)
* Prevents additional edge gateways from connecting to the network
* Allow virtual machines to connect to outside networks
Which network type will satisfy all of these requirements?
- A. Direct Network
- B. Dedicated External Network
- C. Imported Network
- D. Isolated Network
Answer: B
NEW QUESTION # 22
The VMware Cloud Director administrator wants to make sure that the system is able to collect log bundles from all cells at once.
How should the administrator accomplish this goal?
- A. Install vRealize Log Insight agent on each cell to redirect logs to a centralized location.
- B. Configure a syslog server on each of the cells, and request the logs from the syslog server.
- C. Make sure the NFS server allows read-write access to the shared location by the root system account on each cell.
- D. Map the log location on the primary cell to a shared folder on each of the other cells in the server group, ensuring they all have read/write rights on the primary.
Answer: C
NEW QUESTION # 23
An individual is logged into the VMware Cloud Director tenant portal as organization administrator and would like to create a direct organization virtual data center network. The individual, however, receives a message that insufficient rights are held.
Which role is needed to complete this task?
- A. vApp author
- B. System administrator
- C. Tenant administrator
- D. Catalog author
Answer: C
NEW QUESTION # 24
Having just deployed VMware Cloud Director, a service provider needs to create Provider Virtual Data Centers so their tenants can consume cloud resources through their Organization Virtual Data Centers.
Which two options can be used to create Provider VDCs? (Choose two.)
- A. Operations Manager Portal
- B. vSphere Client
- C. vCloud API
- D. Service Provider Admin Portal
- E. Tenant Admin Portal
Answer: B,D
NEW QUESTION # 25
Which VMware Cloud Director resource is consumed to create new routed or isolated vApp networks and Organization VDC networks?
- A. Network Pool
- B. vSphere Distributed switch
- C. External Network
- D. Tier-0 Logical Router
Answer: A
NEW QUESTION # 26
An administrator is trying to add a new Provider VDC and wants to consume the vSphere storage policy immediately.
Which action should the System Administrator take next?
- A. Under Resources -> Infrastructure Resources, click "Reconnect" for the vCenter Server instance.
- B. Under Resources -> Infrastructure Resources, click "Update" for the vCenter Server instance.
- C. Under Resources -> Disable, and then Enable the vCenter Server instance.
- D. Under Resources -> Infrastructure Resources, click "Refresh Policies" for the vCenter Server instance.
Answer: A
NEW QUESTION # 27
Which statement is accurate for virtual machines that need to be customized by VMware Cloud Director?
- A. It must use the VMware Tools for VMware Cloud Director.
- B. It should have the latest VMware Tools installed.
- C. It must be converted into VMware Cloud Director disk format first.
- D. It should use only the tools provided by Windows operating system.
Answer: B
Explanation:
https://docs.vmware.com/en/VMware-Cloud-Director/10.4/VMware-Cloud-Director-Tenant-Portal-Guide/GUID-2D21BDFA-FADB-445A-8CB5-3628255773AC.html
NEW QUESTION # 28
Which deployment achieves high availability of VMware Cloud Director 10.x when using virtual appliances?
- A. One primary appliance and two application cell appliances
- B. Three application cell appliances with an external database
- C. Three primary appliances and setup database replication
- D. One primary appliance and two standby appliances
Answer: D
NEW QUESTION # 29
Which two steps are mandatory before upgrading VMware Cloud Director appliances from 10.1 to 10.2? (Choose two.)
- A. Change the database failover from Automatic to Manual.
- B. Take a snapshot of the standby VCD appliance.
- C. Change the database failover from Manual to Automatic.
- D. Take a snapshot of the primary VCD appliance.
- E. Take a snapshot of the entire VCD appliances cluster.
Answer: C,E
NEW QUESTION # 30
......
5V0-32.21 Exam Questions and Valid PMP Dumps PDF: https://www.test4cram.com/5V0-32.21_real-exam-dumps.html
VMware 5V0-32.21 Certification Real 2024 Mock Exam: https://drive.google.com/open?id=1kzTyyAUFCM3Qjua4T_JOmQPOxT0s9e5g