[UPDATED 2024] Getting 200-301 Certification Made Easy!
200-301 Exam Crack Test Engine Dumps Training With 920 Questions
Cisco 200-301 exam is the replacement for the previous CCNA exams, which were retired in February 2020. This new exam is designed to reflect the latest advancements and best practices in networking technology. It covers a broad range of networking topics, from basic networking concepts to advanced security and automation technologies.
NEW QUESTION # 292
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 293
Refer to the exhibit.
If configuring a static default route on the router with the ip route 0.0.0.0 0.0.0.0 10.13.0.1 120 command how does the router respond?
- A. It starts load-balancing traffic between the two default routes
- B. It starts sending traffic without a specific matching entry in the routing table to GigabitEthernetO/1
- C. It ignores the new static route until the existing OSPF default route is removed
- D. It immediately replaces the existing OSPF route in the routing table with the newly configured static route
Answer: C
Explanation:
Explanation
Our new static default route has the Administrative Distance (AD) of 120, which is bigger than the AD of OSPF External route (O*E2) so it will not be pushed into the routing table until the current OSPF External route is removed.For your information, if you don't type the AD of 120 (using the command "ip route 0.0.0.0
0.0.0.0 10.13.0.1") then the new static default route would replace the OSPF default route as the default AD of static route is 1. You will see such line in the routing table:S* 0.0.0.0/0 [1/0] via 10.13.0.1
NEW QUESTION # 294
which address prefix does OSPFv3 use when multiple IPv6 address are configured on a single interface?
- A. the prefix that the administrator configure for OSPFv3 use
- B. the lowest prefix on the interface
- C. all prefix on the interface
- D. the highest prefix on the interface
Answer: C
NEW QUESTION # 295
Drag and drop the statements about networking from the left onto the corresponding networking types on the right. Not all statements are used.
Answer:
Explanation:
NEW QUESTION # 296
Which type of authentication and encryption does SNMPv3 use at the authPriv security level?
- A. username authentication with MD5 or SHA encryption
- B. DES authentication with MD5 or SHA encryption
- C. MD5 or SHA authentication with DES encryption
- D. username authentication with DES encryption
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/snmp/configuration/xe-3se/3850/snmp-xe-3se-
3850-book/nm-snmp-snmpv3.pdf
NEW QUESTION # 297
Refer to the exhibit.
Which route does R1 select for traffic that is destined to 192 168.16.2?
- A. 192.168.16.0/21
- B. 192.168.16.0/27
- C. 192.168.16.0/24
- D. 192.168 26.0/26
Answer: B
Explanation:
The destination IP addresses match all four entries in the routing table but the 192.168.16.0/27 has the longest prefix so it will be chosen. This is called the "longest prefix match" rule.
NEW QUESTION # 298
Refer to the exhibit.
A network engineer must update the configuration on Switch2 so that it sends LLDP packets every minute and the information sent via LLDP is refreshed every 3 minutes Which configuration must the engineer apply?
A)
B)
C)
D)
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: C
NEW QUESTION # 299
Refer to the exhibit.
Traffic from R1 to the 10.10.2.0/24 subnet uses 192.168.1.2 as its next hop. An network engineer wants to update the R1 configuration so that traffic with destination 10.10.2.1 passes through router R3, and all other traffic to the 10.10.20/24 subnet passes through r2. Which command must be used?
- A. Ip route 10.10.2.0 255.255.255.0 192.168.1.4 115
- B. Ip route 10.10.2.0 255.255.255.0 192.168.1.4 100
- C. Ip route 10.10.2.1 255.255.255.255 192.168.1.4 115
- D. Ip route 10.10.2.1 255.255.255.255 192.168.1.4 100
Answer: D
NEW QUESTION # 300
Which characteristic differentiates the concept of authentication from authorization and accounting?
- A. consumption-based billing
- B. identity verification
- C. service limitations
- D. user-activity logging
Answer: B
NEW QUESTION # 301
Drag and drop the IPv6 address description from the left onto the IPv6 address types on the right. Not all options are used.
Answer:
Explanation:
Explanation
Graphical user interface, application Description automatically generated
NEW QUESTION # 302
Refer to the exhibit.
Host A sent a data frame destined for host D
What does the switch do when it receives the frame from host A?
- A. It shuts down the port Fa0/1 and places it in err-disable mode.
- B. It drops the frame from the switch CAM table.
- C. It experiences a broadcast storm.
- D. It floods the frame out of all ports except port Fa0/1.
Answer: D
NEW QUESTION # 303
Refer to the exhibit.
Which type of route does R1 use to reach host 10.10.13.10/32?
- A. network route
From the output, we see R1 will use the entry "O 10.10.13.0/25 [110/4576] via 10.10.10.1, ..." to reach host 10.10.13.10. This is a network route. Note: "B* 0.0.0.0/0 ..." is a default route. - B. default route
- C. floating static route
- D. host route
Answer: A
NEW QUESTION # 304
Drag and drop the DNS lookup components from the left onto the functions on the right.
Answer:
Explanation:
NEW QUESTION # 305
Drag and drop each characteristic of device-management technologies from the left onto the deployment type on the right.
Answer:
Explanation:
NEW QUESTION # 306
Which two minimum parameters must be configured on an active interface to enable OSPFV2 to operate?
(Choose two.)
- A. OSPF MD5 authentication key
- B. IPv6 address
- C. OSPF area
- D. OSPF process ID
- E. OSPF stub flag
Answer: C,D
Explanation:
Section: IP Connectivity
NEW QUESTION # 307
What are two fundamentals of virtualization? (Choose two.)
- A. It requires that some servers, virtual machines, and network gear reside on the Internet.
- B. The environment must be configured with one hypervisor that serves solely as a network manager to monitor SNMP traffic.
- C. It allows a physical router to directly connect NICs from each virtual machine into the network.
- D. It allows logical network devices to move traffic between virtual machines and the rest of the physical network.
- E. It allows multiple operating systems and applications to run independently on one physical server.
Answer: D,E
NEW QUESTION # 308
......
200-301 Exam Dumps Contains FREE Real Quesions from the Actual Exam: https://www.test4cram.com/200-301_real-exam-dumps.html
Obtain the 200-301 PDF Dumps Get 100% Outcomes Exam Questions For You To Pass: https://drive.google.com/open?id=1UUd0dSTPP5UgGga1PBxRASVkJ9wMRveH